Computer controlled horizontal tensile testing machine

• 

Product Introduction:

The microcomputer controlled horizontal tensile testing machine (hereinafter referred to as the testing machine) is mainly used for steel wire rope, wire and cable, anchor chain, round wire concentric gallows empty wire, insulator and other metal materials, non-metal materials, structural parts tensile performance test, determination of its mechanical properties parameters, characteristic values. The testing machine is widely used in industrial and mining enterprises, power engineering, bridge engineering, petroleum industry, scientific research institutes and colleges and universities mechanics laboratory and structure laboratory.

Applicable Standards:

GB/T 2611 "General Technical Requirements for Testing Machine"

GB/T 6825.1 "Testing of static uniaxial testing machines - Part 1: Testing and calibration of force measurement systems for tension and/or pressure testing machines"

Performance Parameters:

Maximum test force: 200kN

Test force measurement range: 1%——100%F.S

Relative error of test force indication value: within ±1

Test force resolution: 1/300000FS1

Relative error of beam displacement: within ±1

Displacement resolution: 0.01mm

Relative error of deformation indication value: within ±1

Deformation resolution: 1/300000Fs

Beam speed adjustment range: 0.01——200mm/min

Stress rate range: 2——60N/mm/s |

Relative error of beam speed: within ±1% of the set value

Force control rate adjustment range: 0.005%——0.5%FS/S

Relative error of force control rate: within ±0.5%

Deformation control rate adjustment range: 0.02%——5%FS/S

Deformation control rate relative error: when the rate is less than 0.05%FS, less than 2%FS/S; When the rate is greater than 0.05%FS, the rate is less than 0.5%FS/S

Constant force, constant deformation, constant displacement control range: 0.5%——100%FS

Constant force, constant deformation, constant displacement control accuracy: set value ≥10%FS, set value within ±0.1%; When the set value is <10%FS, the set value is within ±1%

Effective stretching space: 200mm/min

Range: 0——1000mm |

Maximum moving speed of beam: 200mm/min

Power supply: 20V±10%; 2000W

Other supplier products

	Leather Low Temperature Bending Strength Tester G6078-B	Product Introduction This instrument is primarily used to test the cold and folding resistance of shoes and shoe materials to determine how well t...
	Porton Thermal Manikin Equipment ISO 12949	Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ...
	Density Gradient Column Apparatus丨Density Gradient Column System	Scope of application: Used for the measurement of density and relative density of plastics and other materials, the instrument adopts the Archimed...
	Plastic Pipe Hydrostatic Pressure Burst Tester / Pipe Hydrostatic Pressure And Burst Tester	Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
	Shoe Abrasion Tester QB/T4329-2012	Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ...

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...