Geosynthetics thickness tester丨Thickness Gauge
Scope of application:
Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on the reference plate, and after a specified pressure is applied to the sample with a circular presser foot parallel to the reference plate for a certain period of time, the vertical distance between the two plates is measured, and the thickness of the sample is expressed as the average value of the test results.
Meet the standard:
GB/T13761.1-2009.S0 .ASTM D5199-2001.JTG E50T1112-2006.SL/T 235-5-2012. etc.
Instrument features:
Design and manufacture according to the standard, in line with the standard specifications;
Shell with special surface treatment, corrosion resistance;
Exquisite mechanical pressure system, simple operation can apply 2KPa, 20KPa, 200KPa precise pressure on the sample;
The adjustable level makes the specimen stressed evenly:
The instrument is easy to install and operate;
Using dial gauge measurement, high precision;
The measurement value is displayed digitally for easy reading.
Technical parameters:
Pressure mode mechanical
Measuring range 0.001——12mm
Minimum division value 0.001mm
Presser foot size 2500mm2
Working pressure 2+0.01kPa,20+0.1kPa,200+1kPa
Overall dimensions 600x300x400mm
Weight 40kg
Standard configuration:
1. One host
2. 1 dial table
3. Use 3 weights
4. 1 pan
5. One battery
6. Four screws for the foot
7. Product packing list 1 copy
8. 1 copy of product manual
9. One copy of product certificate
Send product request
Other supplier products
 |
Snap Button Tester | Button Impact Tester | Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments). Applicati... |
 |
Bally Waterproofness Tester - Leather and Footwear | Product Information: Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. T... |
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Chemical Protective Robotic Manikin Clothing Testing Equipment | Product Introduction TheIndividual Soldier system was commissioned by Defence Research and Development Canada. The second version of the mannequin... |
 |
Snap Button Tester | Button Snap Pull Tester | Standard ASTM D7142-2/F963: Standard Consumer Safety Specification for Toy Safety CFR 1500: Consumer Product Safety Commission (CPSC) Hazardous S... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
