Vacuum Blood Collection Tube Suction Volume Tester
The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows:
Compliance Standards：
The design and manufacture of the Vacuum Blood Collection Tube Aspiration Volume Tester must comply with relevant medical industry standards, such as YY 0314 - 2021Disposable Human Venous Blood Sampling Containers. This standard clearly specifies key indicators, including the error range of the aspiration volume of blood collection tubes, container leakage tests, and container strength tests, to ensure the usability and safety of blood collection tubes. The tester must strictly adhere to these standards during the design and manufacturing process to ensure the accuracy and reliability of test results.
Main Uses：
The Vacuum Blood Collection Tube Aspiration Volume Tester is mainly used to detect the aspiration volume of disposable human venous blood sampling containers, especially to check whether they meet the standard requirements in different altitude areas.
The tester precisely measures the aspiration volume of blood collection tubes by simulating different altitude or air pressure conditions, thereby evaluating the performance of blood collection tubes in various environments. This is crucial for ensuring the accuracy and reliability of blood collection tubes in actual use, and helps maintain the quality of blood samples and the accuracy of diagnostic results.
Technical Parameters：
Vacuum Degree:The test range is usually 0 - - 90kPa to meet the testing requirements of different altitude areas.
Vacuum Degree Accuracy:Generally 0.5 - level to ensure measurement precision.
Vacuum Degree Maintenance Performance: It has automatic air - supplement and constant - pressure maintenance functions to ensure the stability of the vacuum degree during the testing process.
Operation Control Mode:It adopts fully automatic control and touch - screen operation, simplifying the testing process and improving testing efficiency.
Air Source Pressure Requirement:Usually 0.7 - 0.9MPa (the air source should be provided by the user) to ensure the normal operation of the tester.
Air Source Generator: Imported components (such as SMC generators from Japan) are used, with a stability of ±0.1kPa, improving the accuracy of testing.
Power Supply: It supports multiple power supply specifications such as AC 220V 50Hz/120V 60Hz to adapt to different regional power environments.
External Dimensions: The main unit size is usually 300mm(L)×385mm(W)×150mm(H) (the specific size may vary depending on the model), making it convenient to place and operate.
Weight:The net weight of the main unit is approximately 7kg (the actual weight may vary depending on the configuration), facilitating portability and movement.
Language: It supports Chinese/English (standard configuration), and other interfaces such as Russian and Traditional Chinese can be customized to meet the needs of different users.
Send product request
Other supplier products
 |
Environmental Stress Cracking Resistance Tester / ESCR Tester | Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics. ISO 22088-3: Configu... |
 |
Elastic Tape Fatigue Testing Machine / Elastic Fatigue Testing Machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli... |
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7... |
 |
Rubber non-rotor vulcanization Tester丨 Rubber Testing Instruments | Product Introduction: Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic rese... |
 |
Fabric Drying Tester | Product Introduction: This device is developed for the automatic test of "dryness" method A and method B specified in JIS L 1096 (Fabric test meth... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
