Pressure Transmission Flow Meter Test Instrument
The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performance in fluid systems. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:
Standards
The design and manufacture of the Pressure Transmission and Flow Tester need to comply with relevant industry standards and technical specifications to ensure the accuracy and reliability of test results. Common compliance standards include, but are not limited to: GB/T 19335 - 2022 General Technical Requirements for Disposable Blood - path Products, etc.
Main Uses
- Fluid System Performance Evaluation: The Pressure Transmission and Flow Tester can be used to evaluate the pressure transmission efficiency and flow characteristics of fluid systems under specific conditions, ensuring that the systems can meet the design and usage requirements.
- Product Quality Control: During the manufacturing process, this tester can be used for quality inspection of fluid system components (such as pipelines, valves, sensors, etc.) to ensure that product quality complies with relevant standards and regulations.
- Fault Diagnosis and Maintenance: By testing the pressure and flow data of fluid systems, it can help diagnose faults in the systems and provide a basis for the repair and replacement of faulty components.
- Research, Development and Optimization: In the design, research and development process of fluid systems, the tester can be used to test the effects of different design or improvement schemes, providing data support for optimizing system performance.
Technical Parameters
- Testing Range:
- Pressure testing range: 0 - 10 KPa (standard configuration), which can be customized according to actual needs.
- Flow testing range: It depends on the specific model and configuration, usually covering a wide flow range.
- Accuracy:
- Pressure testing accuracy: 0.5%FS (full - scale error) to ensure the accuracy of test results.
- Flow testing accuracy: It depends on the specific model and configuration, but also needs to meet high - accuracy requirements.
- Air Source Pressure and Interface:
- Air source pressure: ≤0.7 MPa (the user provides the air source) to ensure the normal operation of the tester.
- Air source interface: Φ8 mm polyurethane tube or other standard interfaces, facilitating connection to air source equipment.
- Power Supply:
- The voltage and frequency of the power supply vary according to the specific model. It usually supports a wide voltage range to adapt to the electrical standards of different regions. - External Dimensions and Weight:
- External dimensions: The main unit size is 300 mm(L)×410 mm(W)×150 mm(H) (the specific dimensions vary depending on the model), making it easy to place and operate.
- Weight: Moderate, easy to carry and move. - Other Functions:
- Data recording and storage: It has the function of real - time data recording and storage, which is convenient for subsequent analysis and processing.
- Display and operation interface: It adopts a color touch - screen operation interface, supporting Chinese
- English switching (or other languages). The interface is clear and easy to operate and use.
- Automatic calibration and fault diagnosis: Some models are equipped with an automatic calibration function to ensure the accuracy of test results. At the same time, they have a fault diagnosis function, which is convenient for timely detection and resolution of problems.
Send product request
Other supplier products
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The e... |
 |
Single chip liquid crystal touch impact testing machine | Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf... |
 |
Current sensor - Accurate Current Sensing | Product Introduction STD designs alternating current (AC) and direct current (DC) sensors for industrial and automotive applications such as elect... |
 |
Geotextile Dynamic Puncture Tester ISO 13433 | Scope of application: It is used to test the penetration ability of various geomaterials to resist steel cones falling from a fixed height, so as ... |
 |
Auto - ignition Point Tester for Liquids / ASTM E659 | Standards This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
