Film Heat Shrinkage Tester ASTM D2732
The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditions. The following is a detailed description of its main uses, compliance standards, and technical parameters:
Standards
GB/T 13519 and ASTM D2732. etc.
Main Uses
The film heat shrinkage rate tester is mainly used to test the heat shrinkage performance and dimensional stability of various film materials, heat - shrinkable tubes, pharmaceutical PVC sheets, backplanes, etc. in liquid media at multiple temperatures.
By precisely measuring the dimensional changes of the film before and after heating and calculating its heat shrinkage rate, the heat shrinkage performance of the material can be evaluated.
This performance is directly related to the quality and reliability of products. In the packaging industry, such as in the fields of food, beverages, cosmetics, etc., film materials are widely used for product packaging.
The quality of their heat shrinkage performance directly affects the packaging effect and product safety. Through the testing of the film heat shrinkage rate tester, problems that may occur during the heat shrinkage process of materials, such as uneven shrinkage and failure to meet the shrinkage rate standard, can be promptly identified and resolved, thus ensuring the quality of packaging materials..
Technical Parameters
- Testing Range: Applicable to the heat shrinkage performance testing of various film materials, heat - shrinkable tubes, etc.
- Temperature Control Accuracy: Usually with high temperature control accuracy, such as ±0.3°C, to ensure the accuracy and stability of the testing temperature.
- Heating Medium: Generally, the liquid medium heating method is adopted, such as oil bath. The selection of the heating medium should be determined according to the testing materials and testing conditions.
- Specimen Size: The specimen size is usually limited, such as not larger than 140mm×140mm, etc. The specific size should be determined according to the testing standards and equipment requirements.
- Testing Temperature: The testing temperature range is wide and can be adjusted according to actual needs. The testing temperatures for different materials and in different application scenarios may vary.
- Testing Time: The testing time can be set according to actual needs. It usually includes parameters such as pre - heating time and testing time. The pre - heating time is used for the equipment to reach the preset temperature and remain stable; the testing time is used to observe and record the shrinkage of the specimen.
- Data Recording and Analysis: Modern film heat shrinkage rate testers are usually equipped with data recording systems and analysis software, which can automatically record testing data and perform processing and analysis. This helps users more intuitively understand the heat shrinkage performance of materials and provides a basis for subsequent product design and quality control.
Send product request
Other supplier products
 |
Plastic Smoke Density Tester ISO 5659 | Standards: GB/T8323.2-2008: Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test ISO 5659-1: Plastics -... |
 |
Spectrophotometer ISO 7724-1 | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Fabric horizontal burning tester/ Flammability Tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
 |
45-degree dry cleaning tester/ 45 Degree Dry Cleaning Testing Machine | Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen... |
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
