Rain Tester
Standard
- AATCC 35: Water Resistance: Rain Test for Fabrics
- BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration – Rain Test
- GB/T 23321: Textiles – Testing and Evaluation for Water Repellency
Product Advantages
- Realistic Simulation: Mimics horizontal rainfall (60–240 cm water column) to evaluate fabric water repellency under dynamic conditions.
- Precision Control: PLC + touchscreen automation ensures stable water pressure (±1.5 cm accuracy) and liquid level consistency.
- Versatile Testing: Suitable for umbrellas, raincoats, protective clothing, and industrial composites.
- Data Accuracy: Measures absorbent paper weight gain post-test for quantitative water repellency analysis.
- Energy Efficient: 1000W heating system maintains water temperature (±1°C uniformity).
- User-Friendly Design: Large reservoir (40L) reduces refill frequency; tap/distilled water compatible.
Product Features
- Horizontal Spray System: 13 nozzles (φ0.99mm) simulate directional rainfall at 305mm from the sample.
- Adjustable Water Column: 60–150 cm (standard) or 60–240 cm (extended) pressure range.
- Stainless Steel Construction: Corrosion-resistant inner groove for vertical sample fixation.
- Automated Replenishment: Algorithm maintains constant water level for consistent pressure.
- Sample Compatibility: Fits 40mm × 285mm × 190mm material sizes (e.g., fabrics, laminates).
- Safety & Compliance: Overheat protection, emergency stop, and CE certification.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Water Column | 60–150 cm (±1.5 cm) / 60–240 cm (Extended) |
| Water Temperature | 20°C ±1°C (Adjustable) |
| Control Mode | PLC + 7-inch Touchscreen |
| Nozzle Quantity/Size | 13 pcs, φ0.99 mm |
| Nozzle-to-Sample Distance | 305 mm |
| Sample Holder Size | 40 mm × 285 mm × 190 mm |
| Reservoir Capacity | 40 L (Tap/Distilled Water) |
| Heating Power | 1000 W |
| Power Supply | AC 220V ±10%, 50Hz |
| Dimensions (L×W×H) | 810 mm × 610 mm × 1450 mm |
| Net Weight | 125 kg |
Send product request
Other supplier products
 |
Bone Screw Pull-out Tester | Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
 |
Fiber Blend Ratio Tester | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Initial Adhesion Tester | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
UV Viewing Cabinet | Scope of application Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used ... |
 |
Negative Pressure Blood Tube Capacity Tester | The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia... |
Same products
 |
Liquid Sliding Penetration Comprehensive Performance Tester | Seller: Qinsun Instruments Co., LTD | G373 Liquid penetrating and strike-through comprehensive performance tester - Penetrability test ... |
 |
Nonwovens liquid loss tester | Seller: Qinsun Instruments Co., LTD | Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric mate... |
 |
Elmendorf Tearing Strength Tester | Seller: Qinsun Instruments Co., LTD | G008 Manual Tearing Tester - Material Tear Resistance Test G008Manual Tearing Tester, The Elmend... |
 |
Dry Cleaning & Washing Cylinder | Seller: Qinsun Instruments Co., LTD | IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamb... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | Seller: Qinsun Instruments Co., LTD | Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Co... |
