Nonwovens liquid loss tester

• 

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance.

Standards compliant:
Edana152.0-99; ISO9073-11

The main purpose:
Non-woven fabric liquid loss tester _ liquid slip and loss of the tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance.

The main parameters ：
1, flow control range: 6.10mL / s ~ 6.41 mL / s;
2, slip and drain Taiwan angle control: 25 °;
3, slip and loss length: 250 ± 0.2mm;
4, timing: 60s, accuracy: ± 0.1s;
5, slip and loss Weight: 30g ± 0.01g.

Main features of thefabric liquid loss tester:
1, with the requirements of the requirements of the loss of Taiwan and sample fixture;
2, having a dose device capable of giving a 25 mL test solution in a continuous stream within (4 ± 0.1) s;
3, the test liquid out of time manual operation, automatic recording, digital display;
4, can be equipped with loss of weighing system.

Test principle:
A standard absorbent medium is placed under the nonwoven fabric to be measured and the combined sample is placed on a sloping pad to measure that when a particular amount of artificial urine flows down to the combined sample, the liquid penetrates the nonwoven Standard Absorbent Media Absorption, the liquid loss performance of the nonwovens sample was obtained by weighing the weight of the mass of the media prior to testing.

Other supplier products

	Medical Mask Synthetic Blood Penetration Tester	Medical Face Mask Synthetic Blood Penetration Resistance Tester is mainly used in the blood penetration test of masks, which ensures that medical m...
	Wool Fineness Analyzer	Wool fiber textile factory wool inspection GB/T 11603 Determination of average diameter of wool fiber by airflow method ISO1136 Determination of av...
	Collection of needle rubber sleeve resilience tester	Product introduction 　　The collection needle rubber sleeve resilience tester evaluates the force measured by the collection tube when it passes...
	Contact Heat Resistance Evaluation Tester	Product Details The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time r...
	Torque Measurement Device for Metal Bone Screws	Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ...

Same products

	Liquid Sliding Penetration Comprehensive Performance Tester	Seller: Qinsun Instruments Co., LTD	G373 Liquid penetrating and strike-through comprehensive performance tester - Penetrability test ...
	Nonwovens liquid loss tester	Seller: Qinsun Instruments Co., LTD	Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric mate...
	Elmendorf Tearing Strength Tester	Seller: Qinsun Instruments Co., LTD	G008 Manual Tearing Tester - Material Tear Resistance Test G008Manual Tearing Tester, The Elmend...
	Dry Cleaning & Washing Cylinder	Seller: Qinsun Instruments Co., LTD	IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamb...
	Rotary Rubbing Color Fastness Tester (Crockmeter)	Seller: Qinsun Instruments Co., LTD	Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Co...