FST200-202A Auto-heated Wind Direction Sensor
Introduction 描述
F200-202wind direction sensor is a high-reliability, high-performance wind direction measurement sensors, It iswith auto-heated de-icing capabilities. It is built-in strong anti-radio, anti-electromagnetic interference and anti-lightning surge protection circuitrycircuit.It is applied to test wind direction in construction machinery, railway, port, dock,powder plant, weather station, ropeway, greenhouse, aquaculture, and other industry. It isadapt to harsh and low temperature environment . The main structure is made ofalloy materialand is surface treatedwith good waterproof, anti-corrosioncapability. Itsinternal and rotating components are sealed designthat can effectively prevent water, salt spray and dust and other intrusion.
Product Features 产品特征
◇ Non-contact magnetic sensor measuring principle, high accuracy and reliability;
◇ strong wind resistance, strong corrosion resistance;
◇ Widewind speed measurement range, with low startingwind speed;
◇ Compact design, automatic heating , low temperature defrosting;
◇ Sensor circuit protection withfault-tolerant capability;
◇ Meet CE EMC standard, multi-levels for anti-lightning anti-surge design
Application Fields 应用范围
◇wind speed monitoring in frigid,highmoisture, easy to freezefactories, power plants, ports, mines,
◇wind speed monitoring in wind turbines, large machinery and equipment
Main Technical Parameters技术参数
|
Project |
Parameters |
|||
|
Technical Index |
Supply Voltage |
12~30VDC |
12~30VDC |
15~30VDC |
|
Signal output |
4~20mA |
0~5V |
0~10V |
|
|
Start wind speed |
≤0.5m/s |
Testing range |
0-360° |
|
|
Accuracy |
±3° |
Anti-Wind strength |
>70m/s |
|
|
Direction |
16 |
Resolution |
|
|
|
Surge protection |
EMC III |
Protection rate |
IP55 |
|
|
Working temperature |
-40℃~+85℃ |
Electrostatic protection |
15KV |
|
|
Heat ways |
PTCAuto-heated |
Humidity |
0%~95%(Non-condensing） |
|
|
Heat power |
DC24V |
Wind cup material |
Stainless steel 304 |
|
|
Heat Power |
＜50W |
Main |
Aluminum / polyester coating |
|
Dimensions 外形尺寸
Electrical connection and wiring电气接口和接线
|
M12connector |
Signal output |
Wiring method |
||
|
current/voltage/pulse （optional） |
1 |
+Vcc(positive power ) |
Brown |
|
|
2 |
+Signal out |
White |
||
|
3 |
GND（negative power） |
Blue |
||
|
4 |
Heat24V+ |
Black |
||
|
5 |
Heat24V- |
Gray |
||
Installation Instructions
◇The sensor is installed horizontally as shown in the figure, and the angle between the mounting base and the horizontal plane should not exceed 5° so as to ensure that the wind speed can be measured accurately by the sensor under low wind speed conditions.
◇The positions and shapes of the wind cup and the windmill arm can directly affect the accuracy of the sensor as shown in the above figure. Do not hold the wind cup and the windmill arm during installation, so as to avoid the damage to the sensor structure and the influence on the accuracy of measurement.
Send product request
Other supplier products
 |
FST800-220 Industrial Pressure Sensor with 2088 Shell LED displayer | Product introduction The FST800-220 industrial pressure transmitter is sealed with the standard 2088 shell and is a silicon MEMS strain gauge se... |
 |
FST800-217 High Performance Combined pressure and temperature sensors | ProductIntroduction FST800217universalindustrialpressuretemperaturesensorisasiliconMEMSstraingaugesensorwhichisglassbondedtoastainlesssteeldiaphra... |
 |
FST700-201 Hot Sale Popular Capacitance Fuel level Sensor / Transmitter | FST700-201CapacitanceLiquid-levelTransmitteradoptsacoaxialcontainer,thecapacitorconsistsoftwocoaxialelectrodes:innerandoutsideelectrodes.Thecapacit... |
 |
FST800-213 High Accuracy Range to be 7000bar High Pressure sensor | ProductIntroduction The FST800-213 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainle... |
 |
FST7FST700-204 Analog output Self-adjustable fuel level sensor00-204 Analog output Self-adjustable fuel level sensor | Brief introduction FST700-204 Capacitance Intelligent Oil-level Sensor can be used to test the level of non-conductive oil, including diesel, ke... |
Same products
 |
Temperature Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | Temperature transmitteradopts thermonuclear, RTD as temperature measuring element, the output sig... |
 |
Capsule Type Pressure Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | To convert measured pressure values into standard industrial signals, such as 4-20mA, 0-20mA, 0-5... |
 |
Allen-Bradley PLC Module 1769-IA16 | Seller: 840499 | Allen-Bradley PLC Module 1769-IA16 The Bulletin 1769 Compact I/O™ chassis-based modules ca... |
 |
Temperature & Humidity Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | Tinko high temperature humidity transmitterare suitable for HAVC temperature and humidity measure... |
 |
TKSD Duct Mounted Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | TKSD series temperature transmitter with displayare designed for indoor air temperature and humid... |
