UV Test Chamber
LIB uv aging test chamber is used for the aging test of sunlight resistance of materials. The light source uses 8 UV fluorescent lamps with a rated power of 40W. UV lamps are distributed on both sides of the UV chamber, 4 on each side. There are UVA-340 and UVB-313 light sources for users to choose configuration.
UV Test Chamber Features and Benefits
1. UV-SI-260 is widely used in UV aging test, which can realize the comprehensive test of UV, temperature, humidity and water.
2. The uv weathering chamber is equipped with 8 UV lamps, and the current of the lamps can be displayed, mainly to display the service life of the lamps, which is convenient for users to replace the lamps in time.
3. The specimens of the chamber are easy to install, and 56 pieces of 150*100mm specimens can be put in at one time.
4. All chambers are CE and RoHS certified.
UV Test Chamber Specifications
Model UV-SI-260
Internal Dimension (mm) 450*1170*500
Overall Dimension (mm) 610*1330*1470
Specimen Holder Size(mm) 75*150
Specimen Capacity 56 Pieces
Irradiation Source Fluorescent UV lamps (8) - 40 W
Temperature Range Ambient ～ 90 ℃ ±2℃
Black Panel Temperature (BPT) 35 ～ 80 ℃
Humidity Range ≥95% RH
Bandwidth 290 ~ 400nm
Irradiance Control 0.3~20 W/㎡
Water Spray Cycle 1~9999H59M (Adjustable)
Distance of Specimen and lamp 50mm
Controller Programmable color LCD touch screen controller, Ethernet connection
Water Supply System Automatic water supply, Water purification system
Safety Device Over-temperature Protection; Over-current Protection;
Water Shortage Protection; Earth leakage Protection; Phase Sequence Protection
Exterior Material Steel Plate with protective coating
Interior Material SUS304 stainless steel
There are many environmental chamber manufacturers, but we are one of the best choices for you.
Other supplier products
|
|
Salt Spray Chamber |
LIB salt spray chamber simulates the salt fog marine climate, is used in the salt spray corrosion test for accelerated corrosion performance of pla... |
|
|
Water Spray Test Chamber |
LIB Water Spray Test Chamberis used for the ingress protection tests involves immersing the equipment under test (EUT) according to IEC60529 standa... |
|
|
Reach-In Environmental Chamber |
LIB reach in stability chamberssimulate different environmental conditions such as high temperature and high humidity, high temperature and low hum... |
|
|
Salt Spray Chamber |
LIB salt spray chamber simulates the salt fog marine climate, is used in the salt spray corrosion test for accelerated corrosion performance of pla... |
|
|
Benchtop Temperature Humidity Chamber |
LIB benchtop temperature humidity chamberincludes a standard temperature and humidity system with small size, and explosion-proof series models, wh... |
All supplier products
Same products
