KD-8688A Automatic Huge Drop Tester
Product Description
Reliability & Photovoltaic (PV) Testing Equipment.
Reliability & Photovoltaic (PV) Testing Equipment.
Product Feature
1:Automatic drop testing, four column bases lift the specimen, the support arms clip the specimen from both sides, automatically rise to test height and release for dropping.
2:Auto micro balance adjusts the test specimen.
3:To test huge specimen, weight up to 800 kg, dimension up to 1600mm width and 500mm deep. Extend no limitation for Huge dimension.
4:Support arm can be micro adjusted the inclination angle for unbalance drop, corner / edge / face..etc.
5:The base plate is cast made, high rigidity and no resonance structure.
1:Automatic drop testing, four column bases lift the specimen, the support arms clip the specimen from both sides, automatically rise to test height and release for dropping.
2:Auto micro balance adjusts the test specimen.
3:To test huge specimen, weight up to 800 kg, dimension up to 1600mm width and 500mm deep. Extend no limitation for Huge dimension.
4:Support arm can be micro adjusted the inclination angle for unbalance drop, corner / edge / face..etc.
5:The base plate is cast made, high rigidity and no resonance structure.
Product Specification/Models
1:Min. Specimen width:500mm
2:Max. Specimen width:1,500mm
3:Max. Specimen weight:800kg
4:Testing height:150mm-1,300mm
5:Angle of inclination for drop testing:+6.4º~- 7.2º
6:Machine dimension:L2,200mm*W2,050mm*H2,250mm
7:Machine weight:2,000kg
8:Console Dimension:L600mm*W500mm*H1,060mm
9:Console weight:75kg
10:Power requirement:AC 220V / 25A - 3Phase
11:Pneumatic requirement:5-7kg/cm²
1:Min. Specimen width:500mm
2:Max. Specimen width:1,500mm
3:Max. Specimen weight:800kg
4:Testing height:150mm-1,300mm
5:Angle of inclination for drop testing:+6.4º~- 7.2º
6:Machine dimension:L2,200mm*W2,050mm*H2,250mm
7:Machine weight:2,000kg
8:Console Dimension:L600mm*W500mm*H1,060mm
9:Console weight:75kg
10:Power requirement:AC 220V / 25A - 3Phase
11:Pneumatic requirement:5-7kg/cm²
Send product request
Other supplier products
 |
KD-128A Free fall/drop testing | Product DescriptionThis drop tester simulate package in the transportation, loading and unloading process.By dropping impact in the influence degre... |
 |
shock tester | Product Descriptionshock tester belongs to one of destructive types ,it benifit to know product's structure strength and material properties,which ... |
 |
Bump tester | Product DescriptionThe purpose of bump test is to know when the specimen encounters repetitive mechanical-hit environment, the accumulation of its ... |
 |
KD-500 High Payload Drop Testing | Product DescriptionThis tester follows CNS 2999 (packing and transporting vessel drop test method) to make design,various types of packing and tran... |
 |
S-Amp-140 Second Impact Structure(For High G Shock) | Product DescriptionEquipped with shock table,the tester use second impact theory to amplify impact energy.it also can reach the requirement of high... |
Same products
 |
JCID V15 Series iPhone Android Screen Tester | Seller: Shenzhen weikexiu technology Co.,Ltd | Description JCID V15/V15PM screen tester supports testing the full functions of iPhone s... |
 |
XZZ iSocket for iPhone 16 Plus/16 Pro Max Motherboard Layering Test | Seller: Phonefix | XINZHIZAO XZZ iPhone 16 series 4-in-1 motherboard layered test fixture for iPhone 16/16 Plus/16 P... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
