.

Intelligent LCD Display Automatic Kinematic Viscometer ASTM D445

Introduction:
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester,GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosityandASTM D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis suitable to determine kinematic viscosity of liquid petroleum products (Newtonian fluids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.
Main Technical Features:
  • Single chip microcomputer and colored LCD technology. High intelligenceand automation.
  • Intelligent signal sampling, data measuring, parameters operating, and result output. All the operations are finished automatically.English man-machine conversation interface. Easy to operate.
  • The instrument is equipped with timing function. It can choose valid flowing time period and calculate arithmetic average automatically. It can also preset the viscosity coefficient , calculate the viscosity after the test and print the test results automatically.
  • It can do one test alone or doing two tests at one time by setting the parameters.High efficiency.
  • It has the parameters saving function. The instrument will automatically save the parameters of capillary tube diameter, coefficient and so on after these parameters being setted. When doing test with the same capillary, no need to set these parameters again.
  • It adopts desktop and all-in-one machine design. Convenient to use.
Main Technical Specs:
1
Power supply
AC(220±10%)V, 50Hz
2
Bath heating power
1700W
3
Temperature range
Room temperature~100.0℃
4
Temperature control accuracy
±0.01℃
5
Bath volume
20L
6
Timing range
0.0s~9999.9s
7
Timing accuracy
±0.05% within 60min
8
Amount of capillary viscometer tubes
4 capillary viscometers
9
Stirring motor
Power 6W, rotating rate 1200RPM
10
Working condition
ambient temperature-10℃~35℃, RH: ≤85%
11
Temperature sensor
RTD, Pt100
12
Maximum power consumption
1800W
13
Capillary viscometers tubes(Pinkevitch viscometer)
7 pieces in total.The inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
14
Dimension
530mm×400mm×670mm



Send product request

To: 67165
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

GD-265H Intelligent Kinematic Viscometer
GD-265H Intelligent Kinematic Viscometer Summary This instrument is designed and made as per the industry standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petrol...
GDGS Automatic Transformer Capacitance Tester, Dissipation Factor Tester
GDGS Automatic Transformer Capacitance Tester, Dissipation Factor Tester 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate...
GD-6536A Distillation Apparatus
GD-6536A Distillation Apparatus I. Main technical features1.The instrument adopts double units working mode, can do test for one sample as well as two samples which having the sam...
GDGK-306 AC high voltage switch circuit breaker tester
GDGK-306 AC high voltage switch circuit breaker tester I. Introduction GDGK-306 Hot Sale IEC62271 Circuit Breaker Dynamic characteristic Testeris working onIEC62271, it comes with a display screen 320*...
IEC62271 Circuit Breaker Dynamic characteristic Tester
IEC62271 Circuit Breaker Dynamic characteristic Tester I. Introduction GDGK-306 Hot Sale IEC62271 Circuit Breaker Dynamic characteristic Testeris working onIEC62271, it comes with a display screen 320*...
All supplier products

Same products

High Reliability Pneumatic Vertical Shock/Bump Test Machine
High Reliability Pneumatic Vertical Shock/Bump Test Machine Seller: CME Technology Co., Ltd. KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high deg...
Clamping Force Test Machine
Clamping Force Test Machine Seller: CME Technology Co., Ltd. KRD102 series clamping force tester is an indispensable test method for improving products into h...
Packaging Compression Test Machine
Packaging Compression Test Machine Seller: CME Technology Co., Ltd. KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of pa...
 Incline Impact Test Machine
Incline Impact Test Machine Seller: CME Technology Co., Ltd. KRD100 series incline impact tester simulates the ability of product packaging to resist shock da...
Hydraulic Vibration Test Machine
Hydraulic Vibration Test Machine Seller: CME Technology Co., Ltd. KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the powe...