.

ASTM D445 Petroleum Products Intelligent Kinematic Viscosity Bath

Introduction:
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester,GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosityandASTM D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis suitable to determine kinematic viscosity of liquid petroleum products (Newtonian fluids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.
Main Technical Features:
  • Single chip microcomputer and colored LCD technology. High intelligenceand automation.
  • Intelligent signal sampling, data measuring, parameters operating, and result output. All the operations are finished automatically.English man-machine conversation interface. Easy to operate.
  • The instrument is equipped with timing function. It can choose valid flowing time period and calculate arithmetic average automatically. It can also preset the viscosity coefficient , calculate the viscosity after the test and print the test results automatically.
  • It can do one test alone or doing two tests at one time by setting the parameters.High efficiency.
  • It has the parameters saving function. The instrument will automatically save the parameters of capillary tube diameter, coefficient and so on after these parameters being setted. When doing test with the same capillary, no need to set these parameters again.
  • It adopts desktop and all-in-one machine design. Convenient to use.
Main Technical Specs:
1
Power supply
AC(220±10%)V, 50Hz
2
Bath heating power
1700W
3
Temperature range
Room temperature~100.0℃
4
Temperature control accuracy
±0.01℃
5
Bath volume
20L
6
Timing range
0.0s~9999.9s
7
Timing accuracy
±0.05% within 60min
8
Amount of capillary viscometer tubes
4 capillary viscometers
9
Stirring motor
Power 6W, rotating rate 1200RPM
10
Working condition
ambient temperature-10℃~35℃, RH: ≤85%
11
Temperature sensor
RTD, Pt100
12
Maximum power consumption
1800W
13
Capillary viscometers tubes(Pinkevitch viscometer)
7 pieces in total.The inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
14
Dimension
530mm×400mm×670mm



Send product request

To: 67165
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

GDJ-1F Brookfield Viscometer
GDJ-1F Brookfield Viscometer I. Summary  The instrument is designed and made according to the requirement of the T0625 “Asphalt Brookfield Rotation Viscosity Test (Brookf...
ASTM D445 Automatic Kinematic Viscosity Apparatus for Petroleum Products
ASTM D445 Automatic Kinematic Viscosity Apparatus for Petroleum Products Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’...
GDJ-1E Rotational Viscometer
GDJ-1E Rotational Viscometer I. Summary The instrument is one of the upgraded products in our company. Adopting the advanced mechanical design technology, the manufacture techn...
GD-265-3 ASTM D445 AUTOMATIC VISCOSITY TUBES WASHER
GD-265-3 ASTM D445 AUTOMATIC VISCOSITY TUBES WASHER Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ...
GD-265C Kinematic Viscometer
GD-265C Kinematic Viscometer Summary This instrument is designed and made as per the industrial standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petr...
All supplier products

Same products

WF-EDU-02 Motor & Propeller Test Kit
WF-EDU-02 Motor & Propeller Test Kit Seller: Wing Flying Technologies Co., Ltd WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
WF-EDU-01 Motor and Propeller Test Kit
WF-EDU-01 Motor and Propeller Test Kit Seller: Wing Flying Technologies Co., Ltd WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
WF-EN-50 Engine Test Bench
WF-EN-50 Engine Test Bench Seller: Wing Flying Technologies Co., Ltd Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
WF-EN-15 Engine Test Bench
WF-EN-15 Engine Test Bench Seller: Wing Flying Technologies Co., Ltd WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...
BS EN 12600 Two Tyres Impactor
BS EN 12600 Two Tyres Impactor Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...