Building material ignition performance tester
According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.
The standards: EN ISO 11925-2, DIN 53438, DIN4102-1, GB / T 8626 and other standards.
Technical parameters:
1, stainless steel structure box;
2, the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;
3, the flame height adjustable, automatic ignition;
4, the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;
5, gas pressure: 10KPa-50 KPa;
6, burning angle: 0 ° (vertical), 45 °
7, through the chassis outside the debug handle, the burner can move in the horizontal direction;
8, tempered glass door easy to observe the test;
9, stainless steel sample holder and sample template;
10, equipped with two kinds of stainless steel sample clip.Flame height gauge;
11, a high degree of experimental automation, experimental data accurate, easy to operate;
Building materials fire retardant performance testing machinecontrol system:
1, programmable controller (PLC) control:
2, automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;
3, optional automatic detection of wind speed, 6 samples of experimental data preservation;
4, the text display display;
5, real-time monitoring of experimental data, query 6 experimental data, query the alarm content.
6, the experimental abnormal sound alarm.
Send product request
Other supplier products
 |
Seam Fatigue Tester | Standards: Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The seam fatigu... |
 |
Physical performance tester for Building windows and doors | Physical performance tester for Building windows and doors Mainly used to detect the construction of the window of the wind pressure, air tightness... |
 |
Moisture Management Tester | MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an e... |
 |
ultraviolet light accelerated weathering tester | This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, streng... |
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Fabric Friction Chargi... |
Same products
 |
JCID V15 Series iPhone Android Screen Tester | Seller: Shenzhen weikexiu technology Co.,Ltd | Description JCID V15/V15PM screen tester supports testing the full functions of iPhone s... |
 |
XZZ iSocket for iPhone 16 Plus/16 Pro Max Motherboard Layering Test | Seller: Phonefix | XINZHIZAO XZZ iPhone 16 series 4-in-1 motherboard layered test fixture for iPhone 16/16 Plus/16 P... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
