Tape abrasion tester
The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, foil, and inked key pad lettering.
This tester is widely used as a standard for many silicone key pad and membrane switch manufacturers.
This abrader is used as a standard to the auto, appliance, cell , plastics, and coating industries. It uses an inexpensive roll of throw away abrasion paper.
All build-up error is eliminated and consistent readings are easily obtained.
The RCA Abrasion Wear Tester is also referred to as an Abrasive Wear Tester, an Abrader, a Paper Wear Tester, etc.
Instructions:
1, scroll uncoated paper or tape friction with the sample oil after the determination of the effect of the wear certain number of revolutions
2, for the softer material load of 55g or 175g mitigate
3, with a magnifying glass to view
4, the counter: Digital counter (Led display, 0-9999 can set the number of revolutions)
Technical Parameters:
1, the test load (g): 55g g175g 275g
2, test speed: 16 R / MIN
3, machine size: 530 * 490 * 410 (mm)
4, Machine Weight: 59kg
5, power supply: 1Φ, 220V, 5A or designated
Product Configuration:
A set of tools, a magnifying glass.;
Test load: 55g, 175g, one each;
A flat retainer;
3 O-ring. Lap tape
Other supplier products
|
|
din abrasion resistance tester for rubber and plastic |
DIN Abrasion tester, which is the original product & is designed to conform to the DIN 53516, DIN ISO 4649. This top quality and highly popular... |
|
|
Random tumble pilling tester |
Random Tumble Pilling Tester
Standards:
ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D
Applications:
Random Tumble Pilling Tester is used to det... |
|
|
Fabric Friction Charging Charge Tester |
标准：
JIS L-1094； JIS T-8118； ZBW 04008-89； GB/T12703.2-2009； GB 12014-2009； GB/T23316-2009
应用：
摩擦带电测试仪是防静电织物及针织物摩擦时产生带电量的测试设备，用于测量静电荷量的。
... |
|
|
Low Temperature Chrysler Fold Tester |
Standards:
LP-463-KB-28-01 Method A
Applications:
This Cold Fold Tester is applied to the cold fold test based on Chrysler method and designed t... |
|
|
45 degree flammability tester |
Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
All supplier products
Same products
