Velcro Fatigue Tester for hook and loop fasteners
Velcro Fatigue Tester for opening and closing the hook and loop fasteners is designed for opening and closing the hook and loop fasteners, A hook and loop fastener is repeatedly opened and closed for a specified number, and then is rolled by a roller to the hook side and the loop side to stick closely so as to determine the adhesive force and strength. This machine has a memory function. You can adjust the force applied to the specimen by adjusting the counterweight and load.
Standards:
DIN-3415、SATRA TM123、ISO 22776、GB/T 3903.20、GB/T 3903.21、GB/T 23315-2009
Technical Parameters:
1. Wheel diameter: the previous round φ162.5mm, the next round φ160mm;
2. Wheel width: 70mm;
3. Rolling speed: 60rpm / min;
4. Fixture slot: width 4mm, length 55 ± 2mm;
5. Reverse time: 30s reverse;
6. Tests: 5000 times;
7. Load: 5kg;
8. Counter: Counter: LCD liquid crystal display, 0-999999;
9.HP: AC1 / 8HP dual-frequency motor;
10. Instrument material: stainless steel;
11. Surface treatment: painting;
12. Volume: 70 × 47 × 60cm;
13. Weight: 51kg;
14. Power: AC220V, 50HZ, 5A.
Standard configuration:
Velcro fatigue testing machine 1 Taiwan
5kg weight 1
Power cord 1
Features:
1. Determine, opening and closing strength;
2. Digital reading;
3. Construction, in compliance with the standards ;
4. Velco Strips Test weights are supplied with tester;
5. Can be used with every kind of Velcro strips;
6. Rotation – Meter provides the pre-determined number of tests;
Other supplier products
|
|
taber linear abraser |
The Taber Linear Abraser incorporates a horizontal arm that reciprocates in a linear motion. Attached to the end of the arm is a precision bearing ... |
|
|
Textile Spray Rating Tester |
Spray Rating Tester /Fabric surface waterproof performance tester is designed to determine the surface wetting resistance of any fabrics, which m... |
|
|
Electronic Single Fiber Strength Tester |
Single Fiber Strength Tester, suiting to test the tension strength and elongation of chemical fiber, cotton, wool, ramie, silk, glass fiber, fine m... |
|
|
Surgical face masks bacterial Filtration Efficiency (BFE)Tester |
Standards EN 14683 Medical face masks-Requirements and test methods. ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Effici... |
|
|
Dry penetration tester |
Dry penetration tester is designed to determine the properties of the material on the dry matter in the size of the human body dander.Standards com... |
All supplier products
Same products
