Dry Wet rubbing fastness Tester
Testing Standards:ASTM F1319, AATCC 8/165, BS 1006 D02, GB/T 3920, ISO 105 D02/X12, JIS L0849, M&S C8/C8A, NEXT TM6
Applications:
Electronic Crockmeter/Rubbing Fastness Testeris used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke.
The color fastness of the sample is graded by comparing the coloring of the white cotton with the gray scale. Fitted with digital electronic preset-tablecounter for strokes.
Product Information and Features:
Electronic Crockmeter is used to determine colour fastness of materials to wet and dry rubbing, suitable for frequent use and long run tests.
A.Diameter of friction head:16mm or 25mm;
B.The weight to produce a loading of 9N；
C.Electric drive, working voltage of 220V;
D.Equipped with electronic counter, could completely simulate the results of manual friction for 10 times, with high reproducibility;
E.The fixed device for the standard crocking cloth;
F.A steel spring clip for rapidly fastening samples;
G.Control mode consists of AATCC, ISO standards, and customized setting;
H.Automatic alarm to remind the test over.
Accessories and Consumables:
1.The Crocking Cloth Clamps;
2.Standard Emery Paper For Crockmeter;
3.Pre-cut White Crocking Cloths for AATCC/ISO;
4.Pre-cut White Crocking Cloths for SDC;
5.Crockmeter Calibration Fabric;
6.Grey Scale (Staining) ISO/BS Standards;
7.Grey Scale (Staining) AATCC Standards.
Other supplier products
|
|
EN388 Standard Digital Safety Glove Cutting Resistance Test Machine |
Glove anti - cutting performance testing machine for testing the upper, protective gloves, leather and other materials, cutting strength, suitable ... |
|
|
Hydrostatic head Tester |
Hydrostatic Head Tester
Testing Standards:
GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1... |
|
|
low-temperature Bending Test Machine |
Standards: Chrysler LP-463LB-9-01, Chrysler LP-463KB-13-01, Chrysler LP-463KB-10-01, IFAI J1531, Commercial Standard CS-273-65? Applications: Th... |
|
|
taber 5750 abrasion tester |
The instrument can test specimens with different sizes and shapes, especially ideal for the abrasion test of specimens with contoured or polished s... |
|
|
Flammability Test Kit for Indoors |
It is used for European standard indoor flammability test kits. Test the flammability of the upholstered seat material. Widely used in Europe and t... |
All supplier products
Same products
