RCI-600P underground pipe and cable locator underground cable fault pin pointer
BEFORE USING
For different countries and zones, we try to offer differentuser settings for choice.Now the power system frequency and depth measurement unit is optional.
1.Factory setting: default power frequency 50Hz,depth unit is meter
2.Optional setting as below:
Check the receiver panel as below:
![image.png]( "5cf084d6b8336.png")
When the receiver power off, press Set ref. button and Measure button together,at the same time press the ON/OFF button to power on the device and the Welcome interface will appear.
Don’t release buttons until below user setting interface appear.
3.Press Set ref. button to set the Power freq. to 50Hz or 60Hz.
4.Press Measure button to set the Depth unit to M(meter) or FT(foot).
5.After setting long time press ON/OFF button to power off device to finish the setting.
6.Customized setting will be kept when power off. If needed to change setting,modify it again following above steps.
Tianjin Grewin Technology Co.,Ltd.
Web:
Mail:
|
|
0-8km Hand held communication cable tester for cable path and time of fault and testing range of the fault |
Introduction
The TDRL-901 Cable Fault Locator is a portable handholddevice used for locating the broken fault, cross fault, insulation fault and so... |
|
|
split core current transformer 1000/5a |
Features
lThe structure of the self-locking, safe, easy to install, portable
lWide inner window, allowing clamping of big cables or bus-bars
lWid... |
|
|
Grewin 220VAC-230VAC Custom-Made PCB Toroidal Transformer for Power Supply |
We have passed ISO9001:2015,CE,SGS approval and IEC reportGW-ISeries: High Quality Encapsulated Toroidal Transformers with Pins Remark:A. Dr... |
|
|
RCI-601P Electric cable fault locator underground pipe and cable locator |
1.1FUNCTION FEATHER:
lCompass display: to display pipe position and left-right direction directly.
lRight/wrong indication: measure the pipe curren... |
|
|
Grewin Electrical Supply Toroidal Transformer with ISO9001: 2015 |
We have passed ISO9001:2015,CE,SGS approval and IEC report
1.Technical parameters
Power
Input Voltage(V)
Output Volta... |
