KRD10 Hydraulic Vertical Shock Test System
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests to achieve the shock wave and impact energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
l Windows-based stable control system, full-automatic remote-control interface
l Multi-track guide posts combined with good lubricity and noise free hydraulic balance lifting system to achieve stable shifting
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l Built-in brake mechanism to avoid secondary rebound collisions and more secure positioning of the table
l Multiple waveforms: it can perform conventional half-sine waves, post-peak sawtooth waves, or square waves
l The self-buffer & vibration isolation base does not require a special foundation, and easy to install
l One-stop test: built-in test standards meet various requirements to help users to complete test in one stop
Technical Specifications
|
Model Parameters |
KRD 10－2 (Manual) |
KRD 10－5 |
KRD 10－25 |
KRD 10－50 |
KRD 10－100 |
KRD 10－200 |
KRD 10－400 |
KRD 10－500 |
KRD 10－600 |
KRD 10－1000 |
KRD 10－1500 |
KRD 10－3000 |
|
|
Rated Load (kg) |
2 |
5 |
25 |
50 |
100 |
200 |
400 |
500 |
600 |
1000 |
1500 |
3000 |
|
|
Table Size (mm) |
115×115 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1000 |
1500×1200 |
2000×1500 |
|
|
Peak Acc. (g) |
Half-sine |
5~3k |
5~2k |
5~1.5k |
10~750 |
10~600 |
10~450 |
10~400 |
10~300 |
10~300 |
10~250 |
10~150 |
15~100 |
|
Post-peak Sawtooth |
10~200 |
10~100 |
10~50 |
||||||||||
|
Trapezoid |
/ |
15~200 |
15~100 |
15~60 |
15~50 |
30~50 |
|||||||
|
Pulse Duration (ms) |
Half-sine |
|
1.5~60 |
2~60 |
|
3~60 |
|
4~60 |
6~60 |
11~40 |
|||
|
Post-peak Sawtooth |
3~18 |
6~18 |
|||||||||||
|
Trapezoid |
/ |
3~18 |
6~18 |
||||||||||
|
Overall Dimensions (mm) |
450× 180× 2100 |
1000× 900× 2350 |
1400× 1200× 2300 |
1600× 1400× 2300 |
1700× 1500× 2300 |
1700× 1500× 2300 |
1900× 1500× 2550 |
1900× 1500× 2550 |
1900× 1800× 2550 |
1900× 1800× 2650 |
2200× 2100× 2650 |
2700× 2500× 3000 |
|
|
Weight (kg) |
200 |
1000 |
1800 |
3000 |
4000 |
4200 |
4800 |
5000 |
7000 |
8000 |
10000 |
15000 |
|
|
Working Environment |
Temperature range 0 ~ 40℃, Humidity≤80% (non-condensing) |
||||||||||||
|
Power |
Control measurement: 1-phase AC220V±10% 50Hz Oil source: 3-phase 380V±10% 50Hz |
||||||||||||
|
Installation Condition |
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment |
||||||||||||
|
Standards |
MIL-STD-810F IEC68-2-27UN38.3IEC62281 IEC62133-2UL2054 IEEE1625SAEJ2929IEC62660-2 ISO12405-3 UL2580 |
||||||||||||
Send product request
Other supplier products
 |
KRD20 Pneumatic Bump Test Machine | The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on elect... |
 |
KRD30 Constant Acceleration Tester (Box Type) | KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are sub... |
 |
KRD41 Small Drop Test System | KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile s, walkie-talkies, electr... |
 |
KRD102 Clamping Force Tester | KRD102 series clamping force tester is an indispensable test method for improving products into high-quality fields. It is suitable for research, d... |
 |
Packaging Compression Test Machine | KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from defor... |
Same products
 |
Custom Stainless Components for OEM Applications | Seller: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
FH-77 Dissolved hydrogen meter | Seller: Kelilong Electron Co.,Ltd | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
