Tempered Glass Impact Strength Test Equipment
Tempered Glass Impact Strength Test Equipment
Function: Determining the resistance of glazing material to impact by the penetration method.
Principle:
The specimen is supported vertically in a steel frame and an impact shot bag is released from a pre-determined height to strike the specimen at the centre. The height is progressively increased until fracture occurs.
Related Standards:
AS/NZS 2208 Safety glazing materials in buildings – Appendix D: Impact Test
GB 15763.3 Safety glazing materials in building Part 3: Laminated glass – Appendix C: Test device for the impact performance of shot bag
ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.1: Impact Test
Apparatus:
1) Impact testing frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
2) Impact shot bag:
Weight: 45kg±0.1kg 46kg±0.1kg
Height: 330mm ± 13mm
Max diameter: 250mm
Leather thickness: 1.5mm
Lead sand size: 2.5mm
Customized: 25kg /48kg
Send product request
Other supplier products
 |
5052 Aluminum Sheet Stamping And Cutting For LED Bracket Frame | LED bracket frame 5052 aluminum sheet stamping and cutting Hardware stamping parts Material: Aluminum 5052 Size: 292 mm * 232 mm Thickness: 2 mm ... |
 |
Clothing Mannequin Hardware Connector | Card Plate: Stainless Steel 201 Diameter: 85mm Thickness: 2mm Pin shaft: Stainless Steel 304 Diameter: 10mm Length: 120mm Surface: Industrial Surfa... |
 |
ISO 3537 Building Glass Ball Drop Test Equipment | ISO 3537 Building Glass Ball Drop Test Equipment Glazing Materials Ball Test Device Determination of whether the safety glazing material has a cert... |
 |
Glass Ball Drop Testing Device | Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object S... |
 |
Metal Fence Clamp For Nonstandard Sheet Metal Parts | Metal Fence Clamp For Nonstandard Sheet Metal Parts Material: Q235 Thickness: 4 mm Weight: 605 g Dimensions: 180 mm x61 mm Process: laser cutting,... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Seller: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Seller: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
