Acid Penetration Tester ISO 6529-2013 BS EN 463-1995
Standards
GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chemicals-determination of resistance of protective clothing materials to permeation by liquids and gases. BS EN 463-1995 Protective clothing-protection against liquid chemicals- Test method determination of resistance to penetration by a jet of liquid (Jet test) BS EN 468-1995 Protective clothing– protection against liquid chemicals, performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing( type 4 equipment)
Applications
Acid penetration tester is used for water proof air permeability testing of high density fabric, laminated fabric, and coating material etc. Such as canvas, such as canvas, felt, tarpaulin , cover cloth, airtight fabric, outdoor sports material, umbrella testing and waterproof material testing etc. It can be also used for testing liquid and blood permeability testing of medical protective clothing, and chemical material liquid permeability testing of chemical protective clothing, liquid permeability testing of non-woven, filter material, it can be also used for water permeability testing of paper and card board .
Introduction
Protective clothing against acid test system is the main inspecting device for application LA safety mark and industrial product production license for acid proof protective clothing. The device divides to static acid pressure tester, acid and alkali repellant tester, and acid penetration time tester.
Acid penetration tester is mainly used for measuring the penetration time of acid and alkali proof chemical fabrics.
Technical Parameters
| Item | Parameters |
| Specimen size | 100mm*100mm |
| Solution | 0.1mL（conductive method）or 10mm height（indicator method )self provide 50mL beaker |
| Testing condition | Temperature：17-30℃，Relative humidity:（65±2）%RH |
| Timing | 0-99.99s |
| Accuracy | ±0.01s |
| Max acid pressure | Above 150mm H2SO4（80%） |
| Acid pressure rise rate | 60±0.5cm H2SO4/min |
| Measuring range | 0-150mm H2SO4（80%） |
Send product request
Other supplier products
 |
Sharp Tip Tester | Meet the standard: ASTM F963 EN 71-1 ISO 8124-1 Product Introduction: Certain points on toys, if excessively sharp, can cause injuries. Safe... |
 |
Aperture analyzer | An Aperture Analyzer is a specialized instrument used to measure the size and distribution of pores or openings (apertures) within various material... |
 |
Automotive Interior Materials Droplet Characteristics Tester | Automotive Interior Materials Droplet Characteristics Tester - Automotive Interior - standard Standards: 1. 1995L0028-EN-01.01.2007-002.001-25 ... |
 |
Syringe Needle Cone joint Performance Comprehensive Tester | Syringe Needle Cone joint Performance Comprehensive Tester - Other test instrument - standard Product Information: Syringe Needle Cone joint Perf... |
 |
Whole Shoes Flexing Tester | Applications: Shoes Flexing Tester determine its flexibility resistance of shoes or shoes sole through reciprocating flexing movements under the... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
