Universal finger friction tester

• 

Brief Introduction

Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,

ie mechanical stability of the coating.Design Basis Chrysler laboratory test method LP-463LB-9-01.

This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material.

Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking,

lamellar separation of vinyl and other soft furnishings and other materials

Product Description

A tester simultaneously tests four samples, including three bend specimens and a folded specimen.

When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,

the bending test.The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.

If possible, close the flat to exert the appropriate pressure.Bend specimens’ tension with a fixed weight. Tension must be controlled.

Technical Parameter

1. Desktop;

2. Bending test stations: 3 stations;

3. Folding stations: 1 station;

4. Each sample holder may be separately provided on the specimen holder and tension;

5. The rod Working stroke: 70mm; (2.75in.)

6. Fixture spacing: (. 6in) 152mm;

7. Working frequency: 35 times / min;

8. The bending load test: Each sample 36N (8lbf.), Adjustable;

9. The folding load test: After the closure 641N (12lbf.);

10. The bend test specimen size: 76 × 203mm; (3 × 8in.)

11. The folding test sample size: 129 × 129mm; (5 × 5in.)

12. The feature can be manually reset electronic counters;

13. Electronic Counter: 6 digits;

14. Dimensions: 36 × 12 × 20 (length × width × height).

Other supplier products

	Slip Resistance Tester	Slip Resistance Tester - Leather and Footwear - standard Standards: BS EN 13287，EN ISO 20344，Satra TM144 Applications: To measure the sli...
	Fully automatic membrane pore size analyzer	Fully automatic membrane pore size analyzer - Textile and Apparel - standard Standards: ASTM316, GB/T32361-2015 Applications: Scope of ...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ...
	Hydraulic oil purification and filtration tester	Meet the standard: ISO 16889 ISO 4406 ASTM D7619 ISO 11500 Product Introduction: Hydraulic oil purification and filtration testers are esse...
	Geotextile Opening Size Tester (Wet Sieving) ISO 12956 ISO 8124-4	Standards: ISO 12956.GB/T 17634.SL/T 235.ISO 8124-1.ISO 8124-4 Applications: Geotextile Opening Size Tester (Wet Sieving), to determine the char...

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...