.

Solid Auto - ignition Point Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Product Introduction

This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.

Product Features

1. It adopts an embedded processor and the Windows CE operating system.

2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.

3. It supports two working modes, the "standard mode" and the "custom mode" (during the custom experiment, it can save the exothermic peak value in real - time, etc.), taking into account both the standardization and flexibility of the test.

4. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.

5. It uses an electrically heated muffle furnace with natural air - circulation convection to ensure uniform heating of the samples.

6. The furnace cavity is made of heat - insulating vacuum ceramic fiber, which has a good heat - insulation effect.

7. The cubic wire mesh is hung at the bottom of the furnace cover, making it safe and convenient to place samples.

8. It realizes automatic heating control, temperature control, and combustion detection.

9. A cleaning rod is provided for cleaning the inner cavity's central through - hole.

10. A debris tray is provided to collect samples falling from the wire mesh and residual samples cleaned out by the rod.

11. A cooling bracket is provided to place the assembled furnace cover on it for cooling after the test.

12. It uses a thermocouple sensor to quickly and accurately respond to temperature changes.

13. It displays the time - temperature curve in real - time, and the original data can be viewed.

14. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

Technical parameters

Working Environment

(540)℃, <85%RH

Test Objects

Solid

Temperature Control Range

Room temperature650℃

Standard Rise Rate

0.5 ℃/min

Customized Rise Rate

(0.13.0)℃/min

Temperature Measurement Range

(0800)℃

Temperature Measurement Resolution

0.1 ℃

Temperature Measurement Accuracy

±2.5 ℃ below 300 ℃

Heating Chamber Capacity

±(0.75% of the reading) above 300 ℃

Timing Range

2L

Mesh Cage Size

(096)h


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Sole Sand Bath Heat Insulation Tester
Sole Sand Bath Heat Insulation Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The sand bath component of the Shoe Heat Insulation Tester is primarily used to evaluate th...
Material Surface Performance Comprehensive Tester
Material Surface Performance Comprehensive Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Material Surface Performance Comprehensive Tester is a modular instrument designed for ...
Automotive & Motorcycle Control Cable (Flexible Shaft) Fatigue TesterISO 6722
Automotive & Motorcycle Control Cable (Flexible Shaft) Fatigue TesterISO 6722 Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive & Motorcycle Control Cable (Flexible Shaft) Fatigue Tester is designed t...
Glow Wire Tester | Automotive Wire Fire Resistance Test Equipment Manufacturer
Glow Wire Tester | Automotive Wire Fire Resistance Test Equipment Manufacturer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Transparent safety door The heat-resistant glass observation windo...
Oxidation Induction Phase Analysis Tester
Oxidation Induction Phase Analysis Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Differential Scanning Calorimeter DSC is designed to determine the inner heat transition re...
All supplier products

Same products

FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...