Liquid Sustained Combustion Tester
Product Introduction
This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L.2: Sustained Combustion Test and GB/T 21622 - 2008 Test Method for Sustained Combustion of Flammable Liquids in Dangerous Goods.
Standard
GB/T 21622-2008
Product Features
1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. It integrates three working modes, namely the "standard mode", the "custom mode" and the "cleaning mode", for users to choose freely. 4. It uses environmental air pressure and temperature compensation technology to precisely control the heating temperature with high temperature - control accuracy. 5. It has an automatic intelligent sample - feeding module and a maintenance - free automatic cleaning function. 6. It uses highly sensitive photoelectric detection technology to automatically detect flame combustion phenomena, ensuring detection accuracy. 7. It has automatic ignition, positioning and precise automatic timing functions. 8. The instrument has a fault - detection function and audible and visual alarm functions. 9. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical parameters
|
Working Environment |
(5 to 40)°C, <85%RH |
|
Standard Test Temperature |
60.5°C/75°C |
|
Temperature Control Accuracy |
±0.5°C |
|
Ambient Atmospheric Pressure Measurement Range |
(60 to 110)kPa |
|
Ambient Atmospheric Pressure Measurement Accuracy |
±0.5kPa |
|
Heating Timing |
60s, 30s |
|
Sample Volume |
(1 to 3)mL |
|
Sample Accuracy |
±0.05mL |
|
Timing Range |
(0 to 999)s |
|
Timing Display Resolution |
0.1s |
|
Ignition Mode |
Spark Plug |
|
Sample Bottle Capacity |
20mL |
Send product request
Other supplier products
 |
Micro Controll Four-ball Friction Tester | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Mechanical load testing machine for photovoltaic modules | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo... |
 |
High Velocity Impact Tester | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL S... |
 |
Face Mask Tensile Strength Testing Machine (for Face Mask Tensile Tester) | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Shoes Heat Insulation Tester | Application: Shoes Heat Insulation Tester is used to test shoe heat insulation / thermal insulation against hot performance. Place the shoe in san... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
