Carpet Static Load Tester

• 

Instrument Description

When furniture is moved, imprints are often left at the position of its feet. These imprints will disappear only when the carpet recovers to its original thickness. This instrument provides a convenient and reliable method to imitate such imprints and test the recovery of carpets after being compressed. This instrument applies a heavy load to the sample within a specified time, usually a pressure of 7 kg/cm² for 24 hours, with a stressed area of 6.0 cm², making it easy to place the WIRA digital thickness gauge in the compressed area. This device complies with the requirements of BS 4939 *Determination of the reduction in thickness of carpets after long - term heavy static loading*. The experiment is applicable to all textile carpets with the same thickness and structure, and is also applicable when measuring areas with different thicknesses and structures separately.

Compliance Standards

BS 4939: 1987(1996), ISO3416: 1986 Wools of New Zealand test method 124 Part B

Instrument Features

Simulate the imprints caused by furniture

Meet international standard requirements

Combine the static load tester with the thickness gauge, saving a lot of testing time

Simple, compact and durable

Parameters

• Static pressure: 7.0 kg/cm² (≈ 0.70 MPa)
• Loading area: 6.0 cm² (Ø ≈ 27.6 mm circular foot)
• Load accuracy: ±0.5 % F.S.
• Dwell time: 1 min – 99 h 59 min (programmable; 24 h is standard)
• Thickness measurement range: 0 – 50 mm
• Thickness resolution: 0.01 mm
• Recovery observation period: up to 24 h (programmable)

• Frame: anodized aluminum and stainless steel
• Loading foot: polished stainless steel, interchangeable weights
• Test bed: 250 mm × 250 mm (accommodates standard carpet tiles)
• Safety: transparent polycarbonate guard with interlock

• Controller: 4.3-inch color touch-screen PLC
• Data export: USB flash drive (CSV format)
• Power supply: 220 V AC ±10 %, 50/60 Hz, 300 W
• Dimensions: 450 W × 480 D × 650 H mm
• Net weight: ≈ 45 kg

• Operating temperature: 15 °C – 35 °C
• Relative humidity: 20 % – 80 % RH, non-condensing

Other supplier products

	Low Temperature Chrysler Fold Tester	Standards: LP-463-KB-28-01 Method A Applications: This Cold Fold Tester is applied to the cold fold test based on Chrysler method and designed t...
	Femoral Stem Neck Prostheses Fatigue Testing Machine	Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def...
	Adhesion Tester	The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp...
	Ozone Test Chamber STD-AC22	Feature Whole chamber inside and gripers made up of stainless steel, anti-corrosion. Outside of the chamber is baking finish (can choose SUS 304 ...
	Helmets Vertical SpacingInfrared - positioning Tester	Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-20...

Same products

	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	Seller: Qinsun Instruments Co., LTD	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...