Computer-controlled Helmet Impact Tester
Application Scope
This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.
Standard
GB 811 GB 24429
GB/T 38305-2019 GA 44
IS 4151 (India)
DOT FMVSS No. 218 (USA)
ECE R22.05 (Europe)
EN 1078 (Cycling helmets)
IS 2925 (Industrial safety helmets)
Specifications
1 System components: consists of a crash test stand and an analysis recorder.
2 Crash test bench: composed of fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system and seat base and other components.
3 Impact height: control interface setting, with guidance system, acceleration detection and calibration device (1000 ~ 3000mm can be customized)
4 Base: the optimal solution is made of reinforced concrete, the instrument's steel base is connected to the concrete base, so that its quality is not less than 1600kg.
5 Test and Analysis Instrumentation System: consists of acceleration sensors or impact sensors, amplifiers, and data processing, display and recording, and other components. Part of the composition
Technical Specifications:
Dimensions (L*W*H*H cm): 90*80*450 (according to the order impact height)
Weight (kg): 350
Installation requirements:
1 Power supply: AC 220V 50Hz 500W
2 Environment: 10 ~ 35 ℃
3 Operation: floor, connected to the concrete pedestal
Send product request
Other supplier products
 |
Fire stability tester paper gypsum board | Introduction: The Fire Stability Tester for Paper Gypsum Board is an essential instrument designed to evaluate the fire-resistant properties of gy... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Standards GB5763-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles. ... |
 |
Coatings Shear Fatigue Tester | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera... |
 |
Digital Fabric Elmendorf Tearing Strength Tester | Tearing Tester Further Details: The Tearing Strength of fabrics, Paper, Plastic Film, or other comparable materials in sheet structure is controlle... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
