Thrust Bearing Rolling Friction and Wear Testing Machine
Applicable Standards:
ASTM D3702
ASTM G99
ASTM G77
ISO 18535
Product Advantages:
Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation.
Quantifies Friction and Wear: Provides objective, measurable data on key performance indicators.
Enables Material and Lubricant Comparison: Facilitates the evaluation and selection of the best materials and lubricants for specific applications.
Predicts Bearing Life: Wear rate data can be used to estimate the expected lifespan of thrust bearings.
Supports Design Optimization: Provides critical feedback for improving bearing designs to reduce friction and wear.
Standardized Testing: Allows for testing according to recognized industry standards.
Technical data:
Maximum radial load: 5 kN
Maximum spindle diameter: 5 to 30 mm
Spindle taper: DIN 69871A, ISO 50 taper
Rotary motion:
Speed: 0 to 2000 rpm
Continuous torque: 56.4 Nm
Peak torque: 136 Nm
Oscillating motion:
Ranges: variable 0 to +/-20°
Frequency: 0.001 to 1 Hz
Axial motion:
Maximum thrust: 5 kN Stroke: 0 to 30 mm Frequency: 0.001 to 1 Hz kN
Stroke: 0 to 30 mm
Frequency: 0.001 to 1 Hz
Send product request
Other supplier products
 |
Rapid screening Calorimeter | Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz... |
 |
Coating Wear Resistance Measuring Device | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ... |
 |
Solar Cell Spread of Flame & Burning Brand Test Machine | Productintroduction: This apparatus is based on UL 1730. IEC 61730-2 design and development. Is to simulate real conditions to assess roof and com... |
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables | Standards Compliance: U.S. Military Specifications: MIL-W-5086C & MIL-W-22759D (smoke density and toxicity limits for wiring). Chinese Nati... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
