.

Thermal cycle wet freezing testing machine

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 1073: Standard for Safety for Enclosures for Electrical Equipment

ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment

CE Certification(Conformité Européenne)

Product Advantages

Extreme Environmental Simulation

-40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.

98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.

Ultra-Stable Performance

±1°C Temperature Stability: Ensures consistent testing across 1.000+ cycles.

≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.

Rapid Transient Response

IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).

Auto-Tuning PID: Adapts to payload changes in real-time.

Energy Efficiency

40% Lower Power Consumption: Advanced insulation and heat recovery systems.

ECO Mode: Auto-powers down during stabilization phases.

Safety First

Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.

Door Interlock System: Prevents accidental chamber access during testing.

Product Features

Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.

10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.

Self-Diagnostics: Real-time sensor health checks and error logging.

Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Accessories Included

Testing Kit:

4x universal sample racks (adjustable for batteries/PV modules/PCBAs).

10x humidity sensor calibration capsules.

Software Suite:

License key forEnviroTest Pro(Windows/Linux).

1-year free access to cloud-based test report generator.

Calibration & Safety:

NIST-traceable temperature/humidity logger.

Emergency eyewash station (portable).

Maintenance Kit:

Spare heating elements and refrigerant filters.

Chamber cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Temperature Range -40°C to +85°C (operational)
Temperature Fluctuation ≤±1°C
Temperature Deviation ≤±1°C (at steady state)
Temperature Uniformity ≤±2°C (empty chamber)
Heating Rate 10°C/min (typical, configurable)
Cooling Rate 7°C/min (typical, configurable)
Humidity Range 30%–98% RH (non-condensing)
Humidity Deviation ±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume 500L (standard), expandable to 1.500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1.200mm (W) × 1.800mm (D) × 2.000mm (H)
Weight 800 kg (net) / 1.200 kg (gross)


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Plastic ball indentation hardness tester
Plastic ball indentation hardness tester Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
Cell thickness gauge
Cell thickness gauge Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument...
Wet leakage current test system of photovoltaic device
Wet leakage current test system of photovoltaic device Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta...
Solid Auto - ignition Point Tester
Solid Auto - ignition Point Tester Product Introduction This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - si...
Plastic Pipe Hydrostatic Pressure Burst Tester
Plastic Pipe Hydrostatic Pressure Burst Tester Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
All supplier products

Same products

FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...