Safety Helmet Impact Acceleration Tester
Purpose
This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.
Standard
GB / T 2812-2006. GB / T 2811-2007
Technical Parameters for Penetration Test
1. Weight of the penetration hammer: 3.0 + 0.05kg
2. Angle of the tip of the penetration hammer: 60±0.5°
3. Minimum length of the tip of the penetration hammer: 40mm
4. Hardness: 50 to 45HRC
5. Penetration height: 1000±5mm
Technical Parameters for Impact Test
Attributes:
Power electronic
Warranty 1 year
Model HZ-8101B
Tester Standard GB / T 2812-2006. GB / T 2811-2007
Impact Hammer 5 ± 0.1kg
Impact Hammer Diameter 96mm
Puncturing Hammer 3 ± 0.5kg
Length of the Puncturing Hammer 40mm
Puncturing Hammer Diameter 28mm
Hardness of the Puncturing Hammer HRC45
Force Transducer Measuring Range 0- 20KN Drop Height 1000mm Display LED Indicator 20KN
Drop height 1000mm
Display LED digital display
Send product request
Other supplier products
 |
Respirator Fit Test meter | PortaCount Respirator Fit Tester: Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respi... |
 |
Full Notch Creep meter | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Surface Performance Tester STD-FB4 - A | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by artisans and professionals when judging a fabric&rsquo... |
 |
Motor Accessories Combustion Chamber,FMVSS 302; ISO 3795; ASTM D5132-04 | Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng... |
 |
UV curing light box | Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
