Safety Helmet Roll-off Testing Equipment
Purpose
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Test standard:
IS 4151 , ECE R22.05
Mass of initial load: 3 kg ± 0.1 kg
Mass of falling weight: 10 kg ± 0.01 kg
Lowering height: 0.5 meters ± 0.01 meters
Measuring method: manual
Electricity: 220V 50HZ
Test theory: vertical descent
Test steps:
1. previously to the ambient temperature and sanitary conditions for the conditions of the helmet, should be placed on the appropriate head shape and fixed in the appropriate head.
2. In the median vertical plane of the helmet, a device that guides and releases the fall with a total mass of 3 kg ± 0.1 kg is attached to the rear of the shell.
3. 10 kg ± 0.01 kg of falling mass is released and lowered from a height of 0.5 m ± 0.01 m. The guiding device should ensure that the impact velocity is not less than 95% of the theoretical velocity.
Send product request
Other supplier products
 |
Coating abrasion resistance test device | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Photography Testing Light Chamber | Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resolution. IEC 62679: Photometric requirements for video ca... |
 |
Computerized Helmet Impact Evaluation System | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
 |
Film Impact Testing Apparatus (Gardner Type) | Product Introduction: The coating impact resistance test device is mainly used to test the damage degree of the coating after the impact, which fu... |
 |
Luggage lifting and unloading testing machine | The luggage simulation lifting and unloading tester is a measuring instrument for the life of the handle of the luggage carrier. It is one of the i... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
