Tibial Tray Fatigue Tester

Standard

YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of plastic bearing surfaces.

ASTM F1800 (International): Defines methodologies for evaluating the fatigue strength of tibial components under cantilever loading conditions.

ISO 14879-1: Additional compliance for general fatigue testing of total knee joint prostheses.

Product Advantages

Cantilever Loading Precision: Advanced actuator design ensures uniform stress distribution per ASTM F1800 requirements.

5 Million Cycle Endurance: Proven capability to complete YY/T 0810’s 5×10⁶-cycle fatigue test without calibration drift.

Dynamic Load Control: Closed-loop system maintains R=0.1 stress ratio during sinusoidal/random loading (0.1–10 Hz).

Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.

Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.

Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Product Features

Electromagnetic Actuator: 3.000 N peak force capacity with programmable load ratios (R=0.1–10).

Cantilever Loading System: Simulates physiological knee joint moments with ±20 mm axial displacement.

Dynamic Load Control: 0.1–10 Hz frequency range with programmable waveforms (sine, square, random, custom).

Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).

High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).

Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Accessories

Tibial Tray Test Fixture Kit:

Self-centering collet system (28–40 mm tibial tray compatibility)

Laser-aligned loading anvils with diamond-like carbon (DLC) coating

Thermal-Mechanical Chamber:

15L capacity with rapid cooling/heating (15°C/min)

316L stainless steel interior with HEPA filtration

TestMaster Ultimate Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via dedicated iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.5–50 Nm)

Specimen alignment gauges (ASTM F1800 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Temperature/humidity verification probe

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Dynamic Force	±3.000 N (6.000 N peak optional)
Frequency Range	0.1–10 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Axial Displacement	±20 mm (0.1 μm resolution)
Torque Capacity	±20 Nm (0.01 Nm resolution)
Temperature Range	-20°C to +50°C (environmental chamber)
Humidity Control	10–95% RH (non-condensing)
Data Sampling Rate	100 kHz (synchronized across 16 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 2.000W
Dimensions (W×D×H)	1.500 × 1.000 × 2.000 mm
Weight	750 kg (including environmental chamber)
Noise Level	<65 dB (A-weighted)

Other supplier products

	Liquid Sustained Combustion Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...
	Accelerated Weather Tester(Xenon)丨 Accelerated Weather Tester	Features and Benefits 1.Equipped with high-pressure xenon lamps, accurately reproduce the full spectrum of natural sunlight, including ultraviol...
	Four-point Bending Tester	Standard YY/T 0591 (China): Standard for static four-point bending tests of lockable intramedullary nails. ASTM F1264 (International): Specificat...
	Fiber Crimp Elasticity Tester	The Fiber Crimp Elasticity Tester is a specialized instrument designed to measure the crimp degree, crimp elasticity, and crimp recovery rate of fi...
	Bottle Wall and Bottom Thickness Tester	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pharmaceutical, food, cosmetics, and other industries...

All supplier products

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...