Diaper Anti-Side Leakage Performance Tester
Meet the standard:
Compliant with GB: GB/T 28004.1 Diapers Part 1: Baby Diapers.
GB/T 28004.2-2021 Disposable diapers—Part 2:Disposable diapers for adult -5.1
Edana152.0-99. ISO9073-11. etc
Main uses:
Nonwovens liquid loss measurement instrument is mainly used to measure the amount of liquid loss in nonwovens material and evaluate its liquid loss performance. In the fields of textile, medical, packaging and environmental protection, the instrument can be used for material research and development, production quality control and product testing, to guide the improvement of material design and production process.
Main parameters:
1. Test range: generally 0——500ml, depending on the instrument model
2. Measurement accuracy: usually ±0.5ml or higher to ensure the accuracy of the measurement results
3. Sample size: The diameter is generally 40mm, the test area is 20cm² (the specific size may vary depending on the instrument model)
4. Pressure range: 0——200kPa or higher, used to simulate the pressure environment of liquid in nonwovens
5. Time control: Generally 0——999 seconds, you can set a specific test time
Send product request
Other supplier products
 |
Sliding Bearing Fatigue Testing Machine | Material Research and Development During the research and development of new materials, this testing machine can be used to evaluate the fatigue p... |
 |
Dry and Wet Retroreflection Measuring Instrument (for Dry and Wet Retroreflectometer) | Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us... |
 |
Catheter Power Injection Flow and Pressure Tester | Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f... |
 |
Hydrostatic head Tester丨Hydrostatic head Test machine | Introduction The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water dropl... |
 |
Laminoplasty Plate System Fatigue Tester | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
