Metal Wire Repeated Bending Tester
Meet the standard
GB/T 238-2013 "Metal material wire repeated bending test method"
GB/T 235 "Metal material thickness is less than or equal to 3mm sheet and thin strip repeated test method"
ISO/DIS 7801-1983 "Repeated bending test of metal wire"
Main uses
Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be replaced with different round rod, bending position (height) can be adjusted, perforation diameter to replace different bushings.
Test principle
The sample of a certain diameter is clamped in two round rods of specified size, press the button, the sample is bent at about 90°, the sample is broken, and the bending number is automatically stopped, and the bending number is recorded to test the performance of the metal wire under plastic deformation and the defects displayed during repeated bending.
Product Advantages
Evaluates Bending Fatigue: Directly assesses the wire's resistance to repeated bending stress.
Quantifies Ductility: Provides a numerical value (number of bends to failure) for wire ductility under dynamic bending.
Detects Defects: Repeated bending can reveal hidden surface or internal defects that may lead to premature failure.
Standardized Testing: Enables testing according to established national and international standards.
Controlled Test Parameters: Ensures repeatable and comparable test results through precise control of bending angle, speed, and radius.
Automated Operation: Automatic stopping upon fracture and cycle counting simplify the testing process.
Versatile: Can test a range of wire diameters and allows for adjustment of test parameters.
Main parameters
1. sample diameter: 0.3——6mm or 4——10mm
2. sample length: 150——200mm
3. bending Angle: left and right bending 90 degrees
4. Bending speed: 60 times/min
5. Counting range: 0-9999 times
6. Motor power: 1.1KW
Send product request
Other supplier products
 |
Mask Bacterial Filtration Efficiency Tester | Medical Masks bacterial filtration efficiency tester also called BFE test machine is to determine the bacterial filtration efficiency (BFE) of medi... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
Textile surface burning tester丨Textile surface burning test machine | Textile surface burning testeris designed by adopting the latest technology, suitable for determining the fabric surface burning time of fluffy t... |
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Reciprocating Friction and Wear Testing Machine | Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
