Gas Hazardous Characteristics Tester
This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mixtures composed of several pure flammable gases in proportion. It complies with GB 19521.3 - 2004 *Safety Specification for Inspection of Characteristics of Flammable Gas Dangerous Goods. Standards GB 1952.3-2004 uISO 10156：1996 uGB 5085.4 uNY/T 1860 Product Features 1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. The high - resolution photosensitive sensor has a short response time, ensuring that the gas can be captured instantly during flash - explosion and an inspection signal can be output. 4. It uses dual - channel digital flow meters. With high - precision gas flow control, it enables the precise mixing of the gas to be tested and air. 5. The instrument is equipped with an online gas - sampling channel, and the gas to be tested can be determined by gas chromatography - mass spectrometry (GC/MS) and other means. 6. Through a high - precision photosensitive sensor, the instrument can sense the light intensity in the reaction tube in real - time, automatically determine whether the gas at this concentration is flammable, and simultaneously give the combustion rate value. 7. During the test process, it can automatically determine the flammability and control the increase of gas concentration in steps. 8. The reaction chamber is equipped with double - layer tempered glass to protect the safety of experimenters. 9. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing. Technical parameters Operating Environment (5~40)℃, <85%RH Flow Control Range (5~500)sccm Flow Control Accuracy ±1%FS Flow Measurement Response Time ≤1s Combustion Detection Response Time ≤1ms Reaction Tube Size 300mm long, 50mm inner diameter, 5mm thick Combustion Velocity Detection Range ≤500cm/s Combustion Velocity Detection Model Accuracy 5mm/s Gas Channel Inlet Pressure ≤5MPa Gas Sampling Bag 1L
Other supplier products
|
|
Thoracic Drainage System Performance Tester |
The thoracic drainage tester is widely applied in the medical field, mainly used for monitoring and evaluating the performance of thoracic drainage... |
|
|
Fabric horizontal burning tester |
Product details
Horizontal Flammability Tester; Mainly used for determining the horizontal burning rate of materials used in the occupant compartm... |
|
|
Direcct flame impingement Tester |
Introduction
The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura... |
|
|
Demesia Zigzag Tester |
Compliance Standards
IEC60695-2-1(Firehazardtesting)
ISO6722(Roadvehicles-60Vand600Vsingle-corecables)
ASTMD5422(StandardTestMethodforMechanical... |
|
|
Pressure-Flow Transmission Analyzer |
The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performan... |
All supplier products
Same products
