Rubber low temperature brittleness test machine

• 

Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according toGB/T 15256andGB/T5470standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.

Standards：

1. ISO812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness

2. GB/T 15256 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness

3. JIS-K-6261-2006 Rubber, vulcanized or thermoplastic - Determination of low temperature properties

4. ASTM D2137 Rubber property-Brittleness point of flexible polymers and coated fabrics

Technical parameter:

1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose)

2. cooling speed:

0 ℃ —— 1.2 ℃ —— 20 ℃ / min

- 20 ℃ —— 1.0 ℃ to 30 ℃ / min

- 30 ℃ —— 0.7 ℃ to 60 ℃ / min

-40℃——-60℃ about 0.7℃/min

-60℃——-80℃ About 0.5℃/min

Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.

3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃

4. overall size: 900×505×800mm (length × width × height)

5. the overall size of the studio: 220×170×70mm (length × width × height)

6. cooling medium: ethanol or other non-freezing liquid

7. mixing motor: 15W

8. working power supply 220V——240V,50Hz,2kW

Other supplier products

	Flip Phone Durability Tester	Product Introduction: Mobile clamshell testing machine is a special equipment for mobile clamshell fatigue test. Its structure design is reason...
	Full Vehicle Sunlight Simulation Test Chamber，Full Vehicle solar simulation Corrosion test chamber	The Full Vehicle Sunlight Simulation Test Chamber is a high-precision environmental testing facility designed to replicate intense solar radiation ...
	Wet Wick for Humidity Test Chamber	Hanging method The first step is to cut a suitable wet bulb gauze for thehumidity test chamber. The second step is to hang the wet bulb gauze on ...
	UV Exposure Test Machine丨UV Exposure Tester	Features and Benefits 1.Accelerated aging testing can simulate the aging effect of materials in natural environments for years within tens or hu...
	Liquid Sustained Combustion Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...