Surgical Mask Flame Retardant meter
Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related to the safety of medical personnel. The flame-retardancy of mask is one of the important physical indicators for measuring the quality of surgical masks.
Standards:
GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier
YY 0469-2011 Technical Requirements for Medical Surgical Masks, Blood Penetration Test Device
GB 2626-2006 Respiratory protective equipment,Filtered particulate respirator,Flammability
BS EN136-1998 Respiratory protection equipment Full Face Mask Requirements test sign
Major Features
Touch-tone + Counting module control
The digital display counter can preset the 1-99999s time test and automatically stops after the test is completed.
Emulational human head model
The mask clamp is a metal human head model that can fully simulate the actual use of the mask.
High degree of equipment automation
The instrument automatically records the burning time and flame-retardant time with digital display, and equipped with flame temperature measuring probe, flame temperature display, with characteristic of automatic ignition and adjustable flame height.
Application:
flame-retardant tester for surgical mask , It is mainly used to test the burning performance of surgical masks after contact with flame at a certain line speed, which is a special test instrument for flame-retardant performance of surgical masks.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Test mode: automatic |
Burner timing:0~9999.9₮ |
|
Linear velocity of head model automatic movement: (60±5) mm/s |
Distance between the top of the burner and the lowest point of the mask: (20±2) mm, The flame is at a height of (20±2) mm from the top of the burner |
|
Flame height:40±4mm |
Temperature: (800 ±50) C |
|
Temperature sensor: thermocouple detection |
Weight:65k |
|
Burner height adjustment range:30mm |
Power supply:220V 5Hz |
|
Wall thickness of metal head model: 2~3mm |
Physical dimension:810mm* 510 mm* 870 mmBurner timing:0~9999.9₮ |
|
flame resistant and resistance to burning |
Send product request
Other supplier products
 |
Wear Resistance Tester for Total Hip Joint Prostheses | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
 |
Cell thickness gauge device | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument... |
 |
Helmet Strap Tensile Tester | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cert... |
 |
Falling ball impact meter | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
 |
Battery Electrode Resistance Test device | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
