Incline Impact meter
Standard
- ASTM D7748: Impact resistance testing of packaging and transport systems.
- ISO 13355: Automotive component durability evaluation under oblique load conditions.
- ISTA 3E: Simulates truck collision scenarios for palletized freight testing.
Product Advantages
1. Rapid Precision Deployment
- Pneumatic Positioning: Sub-0.1mm repeatability for crash velocity calibration.
- Tool-Free Adjustment: Dial-in impact speeds from 2–12 ft/sec (0.6–3.7 m/s).
2. Modular Impact Configuration
- 6 Load Capacities: 1,000–10,000 lbs (454–4,536 kg) for consumer goods to industrial machinery.
- Scalable Collision Surfaces: Up to 96” × 96” (2.4m × 2.4m) for full-scale product testing.
3. Advanced Data Acquisition
- 4-Channel TLP System: 100 kHz sampling rate captures peak G-forces and deformation.
- Bi-Directional Velocimetry: 1,000VM laser sensor with 0.01 ft/sec resolution.
4. Ergonomic Workflow
- Low-Profile Sled: 8” ground clearance for forklift-free specimen loading.
- Self-Centering Guides: Automatic alignment for repeatable impact angles.
5. Industrial Durability
- Hardened Steel Targets: AR500-grade collision plates resist deformation.
- Sealed Drive System: IP67-rated motor for dusty/wet environments.
Product Features
- Impact System:
- Pneumatic Launcher: 0–8 ft/sec (0–2.4 m/s) in 0.1 ft/sec increments.
- Fail-Safe Braking: Hydraulic deceleration system with 10g emergency stop.
- Data Acquisition:
- TLP Pro Software: Real-time force-time curves and energy dissipation analysis.
- Unit Conversion: Toggle between imperial (lbs, ft/sec) and metric (kg, m/s).
- Safety Systems:
- Enclosure interlocks with laser safety curtains.
- Overload protection at 110% of rated capacity.
- Sled Design:
- Reinforced steel frame with replaceable aluminum impact face.
- Adjustable height collars for 0°–15° oblique angles.
- Mobility:
- Forklift pockets and lifting eyes for warehouse relocation.
- Collapsible guardrails for narrow-aisle storage.
Technical Parameters
| Model | Load Capacity | Collision Surface | Sled Size | Max. Speed | Simulated Drop Height |
|---|---|---|---|---|---|
| Ⅱ1000 | 1,000 lbs | 60” × 60” | 48” × 48” | 8 ft/sec | 18” |
| Ⅱ2000 | 2,000 lbs | 72” × 72” | 60” × 60” | 8 ft/sec | 18” |
| Ⅱ4000 | 4,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ6000 | 6,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ8000 | 8,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ10000 | 10,000 lbs | 96” × 96” | 84” × 84” | 8 ft/sec | 18” |
Accessories & Options
- Collision Surface Upgrades:
- AR600 steel targets for high-abrasion testing.
- Replaceable rubber bumpers for soft-impact simulation.
- Software Add-Ons:
- CrashView Pro™: High-speed video synchronization (up to 10,000 fps).
- Cloud Safety: Remote monitoring for global compliance teams.
- Calibration Services:
- Annual NVLAP-accredited velocity calibration.
- Accelerometer cross-axis sensitivity testing.
- Safety Upgrades:
- Explosion-proof enclosure for hazardous environments.
- Seismic-rated anchoring system for earthquake zones.
- Consumables:
- 1L High-temperature lubricant for linear bearings.
- 5 × Replacement laser sensor covers.
Send product request
Other supplier products
 |
Multilayer geotextile single-layer thickness tester | Scope of application: The multi-layer sample is mechanically separated and the thickness of each single layer of the sample is measured under the ... |
 |
Floor Caster Wear Tester | Meet the standard: GB/T 11982.2, GB/T 4085, BS/EN 425, ISO 4918-2009 ASTM D6962 BS EN 425-2002 BS EN 985-2001 ISO 10581-2011 ANSI-NALFA-LF... |
 |
Gas Hazardous Characteristics Tester | Product Introduction This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure f... |
 |
Steam Shrinkage Test Machine | Testing Standards: ISO 3005:A standard method for determining dimensional changes in fabrics caused by loose steaming, applicable to woven fabri... |
 |
AATCC Viewing Board | Application Textile Mills: Assesses surface defects, wrinkles, and seam smoothness post-washing. Garment Manufacturers: Inspects finished appar... |
Same products
 |
FH-77 Dissolved hydrogen meter | Seller: Kelilong Electron Co.,Ltd | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Seller: Standard International Group (HK) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
