.

Wet leakage current test system of photovoltaic device

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 61730: Safety Standard for Photovoltaic Modules

ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories

CE Certification(Conformité Européenne)

Product Advantages

IEC 61215 Compliance

22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.

<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.

Multi-Directional Spray Simulation

360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.

Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.

Corrosion-Resistant Design

15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.

316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.

Safety First

Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.

Door Interlock System: Halts testing if enclosure is opened during wet cycles.

Smart Data Acquisition

16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.

AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.

Product Features

Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.

7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.

Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.

Modular Design: Expandable from single-module to 10-module parallel testing.

Accessories Included

Testing Kit:

4x PV module test fixtures (adjustable for frameless/framed modules).

10x insulated test leads with alligator clips.

Software Suite:

License key forLeakTest Pro(Windows/Linux).

1-year free access to cloud-based I-V curve analyzer.

Calibration & Safety:

NIST-traceable conductivity meter.

Emergency eyewash station (wall-mounted).

Maintenance Kit:

Spare acrylic tank seal and nozzle gaskets.

Tank cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Test Tank Dimensions 2.100mm (W) × 1.000mm (D) × 250mm (H)
Tank Material 15mm Cast Acrylic (Plexiglass)
Temperature Range 15°C to 40°C (operational)
Temperature Stability ±0.5°C (at 22°C setpoint)
Liquid Resistivity <3.500 Ω·cm (deionized water recommended)
Spray Pressure 0–10 bar (adjustable)
Flow Rate 0–15 L/min (per nozzle)
Power Supply 230V AC, 50/60Hz (single-phase)
Dimensions 2.500mm (W) × 1.200mm (D) × 1.500mm (H)
Weight 350 kg (net) / 450 kg (gross)


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Dry Sand Rubber Wheel Wear Tester
Dry Sand Rubber Wheel Wear Tester Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...
Flooring Radiant Panel Test Apparatus
Flooring Radiant Panel Test Apparatus Standards ISO 9239-1: Flooring fire reaction test - Part 1: Combustion performance of flooring materials tested by radiantheat ASTM E 648: Critic...
Taber Abrasion Tester (Double-Head)
Taber Abrasion Tester (Double-Head) Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas...
Microcomputer - controlled Constant - speed Friction Plate Testing Machine
Microcomputer - controlled Constant - speed Friction Plate Testing Machine Main uses 1. microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brak...
Catheter Strength Tester
Catheter Strength Tester Product Introduction The Urinary Catheter Strength Tester is designed to determine the physical strength characteristics of urinary catheters, ser...
All supplier products

Same products

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Seller: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...