Respirator Seal/Fit Evaluation Tester (for Respirator Fit Tester)
PortaCount Respirator Fit Tester:
Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respirator Fit Tester as a particle detector. While under conditions of negative pressure and constant flow.
The mask is tested on a full headform with an enhanced bladder seal system to provide a tight seal for most CBRN gas mask and commercial respirator types and sizes. Testing masks on Qinsun’s full headform configuration allows for use of the mask’s head harness, mimicking a real-life application and providing more accurate test results.
The PortaCount Pro+ Fit Tester eliminates the guesswork associated with tedious and error-prone qualitative fit test methods. Rather than depending on a person’s chemical sensitivity or cooperation during a qualitative fit test, the PortaCount Pro+ Fit Tester measures actual fit.
Standard：
ISO 16975:3-2017
Features&Benefits:
Separate tests for overall mask integrity (Protection Factor), exhalation valve and drink tube
Integrated aerosol wand pinpoints leak locations, allowing for immediate evaluation and repair
Full headform configuration allows for use of the mask’s head harness, mimicking real-life application and providing more accurate test results.
Single head form with an enhanced bladder seal system creates a tight seal for most gas mask and full face respirator types and sizes.
Easy-to-read display with an intuitive step-by-step test sequence allows for minimal operator training
IncludedItems:
HEPA Filter Canister (x2)
Drink Tube Sampling Hose
DT & EV Bypass Hose
Emery Oil (500 ml)
PortaCount Fit Tester Interface Cable (for Models 8030/8038 only)
MITA Computer Cable
USB to Serial Converter
MITA Communicator Software CD
Quick Start Guide
Self Check Components Reference Card
Send product request
Other supplier products
 |
Fireproof coatings tester | Sample making: 1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75... |
 |
Impact strength tester for car seat launching headrest | Applicable standards: GB 11550-2009"Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the r... |
 |
Fabric Downproof Tester(Rolling Box) | Fabric anti-drilling velvet testerMainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a vari... |
 |
Bearing Friction Torque Evaluation Device | Standards GB/T 32562-2016 JJF1137-2024 Main Purposes The bearing friction torque tester is a precision instrument specifically designed for measuri... |
 |
Mask respiratory resistance meter | Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the s... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
