.

Fireproof coatings tester

Sample making:

1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.

2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。

3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.

The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.

Technical parameters:

The specimen holder can be tilted 450±20

Copper combustion cup: Outer diameter 24mm± 0.1mm,

The wall thickness is 1mm±0.06mm, the height is 17mm±0.1mm and the volume is 6mL

Fuel: Chemically pure grade anhydrous ethanol


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Curtain Combustion Tester
Curtain Combustion Tester The curtain combustion tester is a special equipment for testing the combustion characteristics of fabrics such as curtains. Working principle: A...
Building material products single combustion tester
Building material products single combustion tester Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C...
Building Material Flammability Test Furnace
Building Material Flammability Test Furnace Product Introduction: Touch screen control building materials flammability test furnace adopts stainless steel box, is in the old JCK-2 products b...
Fireproof coatings tester
Fireproof coatings tester Sample making: 1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75...
Thermal Insulation Rock Wool Thermal Load Tester
Thermal Insulation Rock Wool Thermal Load Tester Introduction: This equipment determines the temperature at which rock wool insulation shrinks under a specified load when heated at a controlled r...
All supplier products

Same products

FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...