.

Tungsten carbide alloy powder

Tungsten carbide alloy powder
  • Tungsten carbide alloy powder
Produced by: TAIZHOU WANGLONG MACHINERY CO.,LTD

All supplier products
Send product request
Tungsten carbide alloy powderTungsten carbide alloy powder has excellent properties of low stress mill grain and abrasion resistance, but impact performance has dropped, it has good properties of high temperature oxidation resistance and corrosion resistance, difficult on machining, commonly used in the requirements of mill grain and abrasion occasions, such as: plates, scraper, fan blades, screw conveyer and conveyer shaft.

Powder

Hardness HRC

Chemical composition (weight%)

Typical application

MH-NiZWc1

65

50% Deloro60+50% casting WC

Mixer blades, scraper and fan blades.

MH-NiZWc2

62

65%Deloro60 +35% casting WC

Screw propeller and conveyance shaft.

MH-NiZWc3

62

85% Deloro60 + 15% casting WC

Screw propeller and conveyance shaft.

MH-NiZWc4

65

40% Deloro60

+60% casting WC

Mixer blades, scraper and fan blades.

MH-NiZWc5

65

60% Deloro60

+40% casting WC

Screw propeller and conveyance shaft.

MH-NiZWc6

62

70% Deloro60

+30% casting WC

Screw propeller and conveyance shaft.

MH-Ni60Wc 35

62

65%Ni60 +35% WC

Fan blades, screw propeller etc.

MH-NiW ( Melting)

65

65%Ni+35%W

Ball valves, the compressor shaft seal pump, Lasita round, pump parts, etc.

MH-NiWc ( Melting)

65

65%Ni+35%W C

Valve,guide lever, components oflaminated paperroll pump, wear resistant ring etc.


Send product request

To: TAIZHOU WANGLONG MACHINERY CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

stellite alloy powder
 stellite alloy powder 粉末 硬度 化学成分（重量%） 典型用途 C Cr Si W Fe Mo Ni Co Mn B Stellite1 48 Bal 阀座、轴承、刀口等 Stellite3 48 ...
Iron based alloy powder
 Iron based alloy powder Iron based alloyIron based alloy has the function of good wear resistance, high temperature resistance, anti-oxidation and thermal shock resist...
Stainless steel powder
 Stainless steel powder Stainless steel powderThe main scope of using stainless steel powder: 1. Using powder metallurgy (PM) on sintered suppression. 2. Metallurgy inj...
Thermal Spray Powder
 Thermal Spray Powder (Aggl /Sintered /Spheroid )45/15um 106/20um(Aggl /Sintered /Spheroid) 45/15um 106/20umNiCr/Cr3C2 45/15um
Nickel based alloy powder
Nickel based alloy powder Nickel based alloyNickel-based alloy is mainly the alloy of nickel, chromium, silicon and boron. The melting point of this alloy is is low, th...
All supplier products

Same products

SCC L8013Cr 2-7/8 EUE Tubing Coupling SSC
 SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing...
Special Clearance 1.9 N80 NUE Tubing Coupling
 Special Clearance 1.9" N80 NUE Tubing Coupling Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
DS55/HT55/HST55 4145h Crossover
 DS55/HT55/HST55 4145h Crossover Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
X-over 3-7/8CAS 2Cr13 Crossover
 X-over 3-7/8"CAS 2Cr13 Crossover Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
JFE BEAR Thread Type Super 13Cr Crossover
 JFE BEAR Thread Type Super 13Cr Crossover Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...