90/10 Copper Nickel wire mesh
90/10 Copper Nickel Alloy
Chemical composition (%)
Alloy Name Copper Nickel Iron Lead
90-10 copper nickel C70600 ~ 89 9.0 – 11.0 1.0 – 1.8 < 0.05
Mechanical Properties:
Tensile strength ( M/Pa ) 20℃ ≥275
Yield strength 0.2% (MPa)20℃ ≥105
Characteristics:
1. Excellent resistance to bio-fouling and corrosion in sea-water
2. Moderate strength, workability, formability and weldability；
3. High resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement
Applications:
1. Desalination
2. Underwater tubing
3. Exchangers
4. Marine hardware
Specification:
Wire JIS C2521
ANSI/ASTM B164 Diameter:0.05mm-10.0mm,
0.002 Inch to 0.3937 Inch
Wire Mesh GB/T 5330.1
GB/T 17492
JB/T 9155 0.5-250 mesh/Inch
Thickness: Min0.05mm
Sheet JIS C2521 Thickness: 0.05mm and above
Other supplier products
|
|
Hastelloy C wire mesh |
Hastelloy C
Chemical Composition (%):
Hastelloy C Ni Mo Cr Fe W Co Mn C V P S Si
Min Rem 15.0 14.5 4.0 3.0
Max 17.0 16.5 7.0 4.5 2.5 1.0 0.01... |
|
|
Monel 400 wire mesh |
Monel 400
Chemical composition (%):
C Mn S Si Ni Cu Fe
0.30 max 2.00 max 0.024 max 0.50 max 63.0 min 28.0-34.0 2.50 max
Physical and Mechanical... |
|
|
Tungsten wire mesh |
Tungsten
Tungsten Grade WAL1 WAL2 WAL3
Physical and Mechanical Properties
Melting point 3,422±15 ºC
Hardness 300-650 HV 30
Charact... |
|
|
Zirconium wire mesh |
Zirconium Grade
Zircaloy Grades Grades 702C Grades 705C
Physical and Mechanical Properties
702C 705C
Tensile Strength ksi 40,000 50,000
MPa 27... |
|
|
Titanium wire mesh |
Titanium
Titanium Grade (Commonly used)
Titanium Grade GR1 GR2 GR3 GR4
Physical and Mechanical Properties
Melting point ºC 1660
Yield St... |
All supplier products
Same products
