Titanium carbide guide wheel - hard alloy wear-resistant
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring no shaking during rotation and improving the guiding accuracy. Its maintenance cost is low, and it does not require frequent lubrication. Only regular cleaning of surface impurities is needed, making it suitable for continuous operation of automated production lines. In the production of metal wire mesh, guide wheels can ensure the uniformity of the mesh holes of the wire mesh, keeping the error within 5% and meeting the strict requirements of filter materials. The hard alloy titanium carbide guide wheel has excellent thermal shock resistance. It will not crack when the temperature rises sharply from room temperature to 300℃ and then drops sharply back to room temperature, making it suitable for intermittent production conditions. The size range of guide wheels is wide, with diameters ranging from 50mm to 500mm and widths from 10mm to 100mm, which can be adapted to different types of drawing or rolling equipment. In the production of optical fibers and cables, it can precisely guide optical fibers, keeping the attenuation rate of optical fibers below 0.2dB/km and ensuring the quality of communication.
Other supplier products
|
|
Steel-bonded hard alloy round bar, TiC hard phase, steel bonding phase |
Compared with conventional high-speed steel bars, carbide titanium round bars enable a 3–5× increase in cutting speed, thereby substant... |
|
|
Milling cutter rod carbide round bar |
Titanium carbide round bar, also known as TiC bar, is a kind of metal-ceramic bar with steel as the binding phase and titanium carbide as the har... |
|
|
Titanium carbide alloy rods are suitable for metal stamping |
Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly r... |
|
|
Chromium carbide powder for sintering |
The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
|
|
High cost-performance titanium carbide powder |
The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements... |
All supplier products
Same products
