Titanium carbide hard alloy drive wheel - Specialized
The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sintering using titanium carbide powder with a purity of ≥99.6 wt%. It exhibits a Vickers hardness equivalent to HRA >92, a theoretical density of 6.68 g/cm³, and exceptional resistance to wear, high-temperature oxidation (continuous service temperature up to 1600 °C), and chemical corrosion. The working surface undergoes precision grinding and polishing, achieving a surface roughness of Ra ≤ 0.4 μm; dimensional tolerances are maintained within ±0.01 mm for diameter, width, and bore, ensuring coaxiality and roundness compliant with ISO 286–1 (IT5–IT6 grade). This results in low-friction operation (coefficient of friction ≤ 0.15), minimal transmission noise, and negligible surface damage to conveyed materials. Relative to conventional stainless steel or aluminum alloy guide wheels, its wear resistance is enhanced by a factor of 5–8, thereby extending service life significantly and reducing maintenance intervals and total cost of ownership. The guide wheel is vacuum-sealed for transit integrity and is fully customizable—diameter (10–500 mm), width, bore geometry, and bearing interface can be tailored to equipment specifications. It is widely deployed in demanding industrial applications, including metallurgical continuous casting lines, mining conveyor systems, semiconductor wafer handling, aerospace component assembly, and high-temperature furnace transport mechanisms.
Other supplier products
|
|
Abundant stock, lightning-fast delivery of chromium carbide powder |
This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated ni... |
|
|
Titanium carbide guide wheel - wear-resistant and durable |
The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to ... |
|
|
Wear-resistant titanium carbide rods, extending service life |
The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1,000 mm. It is amenable to secondary pro... |
|
|
Ultra-fine grain tantinium carbide round rods |
The TiC titanium carbide rod/bars is mainly used for Hammer head, jaw plate, concave, mantle, alloy ball, plate hammer wear part,machine equipment ... |
|
|
Carbide round rods for precision instruments |
该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。... |
All supplier products
Same products
