Cobalt Metal

Cobalt Metal for Sale

Cobalt is a shiny steel-gray metal, relatively hard and brittle, ferromagnetic, heated to 1150℃ magnetic disappear. The combined valence of cobalt is 2 and 3. It does not interact with water at room temperature and is stable in humid air. It is oxidized to CoO when heated to more than 300℃ in the air, and burned into Co3O4 when white hot. The fine cobalt metal minor powder produced by hydrogen reduction can spontaneously ignite into cobalt oxide in air.

Specification of Cobalt Metal

Chemical Composition
Co:99.95	C: 0.005	S<0.001	Mn:0.00038	Fe:0.0049
Ni:0.002	Cu:0.005	As:<0.0003	Pb:0.001	Zn:0.00083
Si<0.001	Cd:0.0003	Mg:0.00081	P<0.001	Al<0.001
Sn<0.0003	Sb<0.0003	Bi<0.0003

Application of Cobalt Metal

Cobalt metal is mainly used to make alloys. Cobalt-based alloy is the general term for an alloy made of cobalt and chromium, tungsten, iron, and nickel. The wear resistance and machinability of the tool steel with a certain amount of cobalt can be significantly improved. Starlite carbide with cobalt-50 or more will not lose its original hardness even if heated to 1000℃. Today, this kind of carbide has become the most important material used between gold-cutting tools and aluminum.

Production Process of Cobalt Metal

The methods of extracting cobalt from cobalt-containing materials can be divided into full fire process, full wet process and combined fire and wet process. Modern cobalt extraction mostly uses a combined process.

(1) Full fire process. It was widely used before the 1940s, and now only the Panda cobalt plant in Zaire uses electric furnace to melt copper and cobalt alloys.

(2) Full wet process. It mainly includes the pressurized acid leaching, ammonia leaching, sulfuric acid leaching, nitric acid leaching and chlorination leaching of various materials containing cobalt.

(3) Joint process. It can be roughly divided into two cases: one is to use sulfation roasting (copper and cobalt concentrate, pyrite), reduction roasting (laterite ore), arsenic removal roasting (arsenic and cobalt concentrate) and other simple fire treatment, and then leaching with acid or ammonia solution; The other is in the process of copper, nickel, zinc and other metals smelting process, cobalt enrichment as an intermediate, and then wet treatment.

Due to the complexity of cobalt extraction materials, there is no "standard" or traditional process for cobalt metallurgy. However, no matter what process is used, the final production of cobalt metal generally adopts wet process, which is a major feature of cobalt metallurgy. The production of metallic cobalt from intermediate products containing cobalt obtained by various processes is usually done by drilling electrolysis or hydrogen reduction.

Features of Cobalt Metal

There are 13 isotopes of cobalt, but only 59Co is found in nature. The artificially produced isotope 60Co has a wide range of uses.

The stable crystal shape of cobalt at room temperature is hexagonal dense packing, while the stable structure above 673K is face-centered cubic.

Cobalt is a ferromagnetic substance, similar to iron and nickel in hardness, tensile strength, mechanical properties, thermodynamic properties and electrochemical behavior.

If you want to know more kinds of refractory metals, please visit our website.

Other supplier products

	Molybdenum Tube	Molybdenum tubehas high melting point, high strength, good thermal conductivity, high temperature resistance and corrosion resistance; Can be us...
	Tungtsen Powder	Tungsten powderis the main raw material for processing powder metallurgy tungsten products and tungsten alloys. Pure tungsten powder can be made in...
	Ferro Niobium	Ferroniobium an iron alloy with niobium and iron as its principal components. It also contains impurities such as aluminum, silicon, carbon, sulfur...
	Refractory Metals	As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of...
	Indium Ingot	CAS 7440 74 6 indium ingots for sale. Soft enough to score with your nails. Good ductility, no work hardening phenomenon during pressure process...

All supplier products

Same products

	Ferro Titanium Feti30/70	Seller: Inner Mongolia Pusheng Iron & steel Co,.ltd	Ferro titanium 30 is titanium content 30%-35% iron alloy Ferro titanium 70 is titanium content a...
	China Mn 965 Mn 95 Manganese Metal Lump/Ingot/Briquette for The Production of Special Steel	Seller: Inner Mongolia Pusheng Iron & steel Co,.ltd	manganese is in high purity,it is used to increase the hardness of metal materials,the most widel...
	Inner Mongolia Pusheng Supply Manganese Metal Flakes	Seller: Inner Mongolia Pusheng Iron & steel Co,.ltd	Electrolytic manganese is in high purity,it is used to increase the hardness of metal materials,t...
	Steel Making Ferromolybdenum Femo60 Ferromolybdenum	Seller: Inner Mongolia Pusheng Iron & steel Co,.ltd	Ferro molybdenum is an amorphous metal additive in the production process.One of the main benefit...
	Ferro Silicon 75 Chinese High Quality Factory Ferrosilicon	Seller: Inner Mongolia Pusheng Iron & steel Co,.ltd	Ferro Siliconused coke quartz(or silica)as raw material is made by electric furnace, because sili...