Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers
is welded by galvanized low carbon steel wire or high quality low carbon steel wire
It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam.
Specification of trench mesh reinforcement
Surface treatment:galvanized or drawn wire
Material: R250N, D500N, D500L, D300E, D500E
The Tensile strength is 300Mpa.
Thewas produced by standard AS NZS 4671-2001
Width: 0.2m - 2.3m
Length: 6m
|
REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH |
||||
|
Code |
STD UNIT |
LONGITUDINAL WIRES |
CROSS WIRES |
MASS / KG |
|
L8TM200 |
6 Metre |
3 x 7.60 @ 100 |
||
|
L8TM300 |
6 Metre |
4 x 7.60 @ 100 |
||
|
L8TM400 |
6 Metre |
5 x 7.60 @ 100 |
||
|
L8TM500 |
6 Metre |
6 x 7.60 @ 100 |
||
|
L8TM600 |
6 Metre |
3 x 7.60 @ 100 |
||
|
L8TM2400 |
6 Metre |
25 x 7.60 @ 100 |
72 |
|
|
L11TM200 |
6 Metre |
3 x 10.70 @ 100 |
13 |
|
|
L11TM300 |
6 Metre |
4 x 10.70 @ 100 |
||
|
L11TM400 |
6 Metre |
5 x 10.70 @ 100 |
||
|
L11TM500 |
6 Metre |
6 x 10.70 @ 100 |
||
|
L11TM600 |
6 Metre |
7 x 10.70 @ 100 |
34 |
|
|
L11TM2300 |
6 Metre |
24 x 10.70 @ 100 |
||
|
L12TM200 |
6 Metre |
3 X 11.90 @ 100 |
||
|
L12TM300 |
6 Metre |
4 X 11.90 @ 100 |
||
|
L12TM400 |
6 Metre |
5 X 11.90 @ 100 |
||
|
L12TM500 |
6 Metre |
6 X 11.90 @ 100 |
||
|
L12TM600 |
6 Metre |
7 X 11.90 @ 100 |
||
And Alls of using is accordance to AS NZS 2870-2011.
The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments.
The is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different.
The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft:
(a). pier to be located on the intersection of every third internal beam.
(b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.
Send product request
Other supplier products
 |
Merchant sheets mesh | Merchant sheets mesh A142 / A193 / A252 / A393 Reinforcing mesh/reinforced steel mesh/reinforcement mesh Merchant sheets mesh as, which produc... |
 |
Slab mesh reinforcement for footing slab, beam and piers | The is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS... |
 |
Strip Foundation mesh reinforcement A393 | umber of strip foundation mesh stock which is fit for meeting the requirements for most British domestic house. was made by heyou wire mesh factor... |
 |
SD Reinforcing Mesh Q131 / Q188 / Q221 / Q295 / Q378 / Q443 / Q513 / Q670 / R378 / R443 / R513 | Heyou's SD Reinforcing Mesh was produced by the raw material:B500A,B500B at the Heyou's plants (Anping). SD reinforcing mesh is fabricated accord... |
 |
Standard Mesh | Standard Mesh A98 / A142 / A193 / A252 / A393 reinforcing mesh/reinforced mesh / reinforcement mesh Standard mesh is belong to reinforcing mesh,... |
Same products
 |
Steel Searcher Steel Supply Chain Aluminum Sheet | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher Steel Supply Chain Aluminum Sheet Metal Custom perforated aluminum sheetis made o... |
 |
V-shore Frame | Seller: Suzhou TECON Construction Technology Co., Ltd | V-Shore Frame Conventional Scaffoldingis a high load conventional shoring system consisting of th... |
 |
Timber Formwork | Seller: Suzhou TECON Construction Technology Co., Ltd | TECON Timber formworkmainly includes BASE 20 Wall Formwork, Flex 20 Slab Formwork, Slab Table For... |
 |
Wire Mesh Wholesale | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel searcher- Wire Mesh main application in hardware custom is "screen, filter, printing, solid... |
 |
Additive Manufacturing Machine | Seller: Eplus3D | Renowned as one of the preeminent 3D printing machine manufacturersin China, Eplus3D specializes ... |
