Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers

is welded by galvanized low carbon steel wire or high quality low carbon steel wire

It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam.

Specification of trench mesh reinforcement

Surface treatment:galvanized or drawn wire

Material: R250N, D500N, D500L, D300E, D500E

The Tensile strength is 300Mpa.

Thewas produced by standard AS NZS 4671-2001

Width: 0.2m - 2.3m

Length: 6m

REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH
Code	STD UNIT	LONGITUDINAL WIRES	CROSS WIRES	MASS / KG
L8TM200	6 Metre	3 x 7.60 @ 100
L8TM300	6 Metre	4 x 7.60 @ 100
L8TM400	6 Metre	5 x 7.60 @ 100
L8TM500	6 Metre	6 x 7.60 @ 100
L8TM600	6 Metre	3 x 7.60 @ 100
L8TM2400	6 Metre	25 x 7.60 @ 100		72
L11TM200	6 Metre	3 x 10.70 @ 100		13
L11TM300	6 Metre	4 x 10.70 @ 100
L11TM400	6 Metre	5 x 10.70 @ 100
L11TM500	6 Metre	6 x 10.70 @ 100
L11TM600	6 Metre	7 x 10.70 @ 100		34
L11TM2300	6 Metre	24 x 10.70 @ 100
L12TM200	6 Metre	3 X 11.90 @ 100
L12TM300	6 Metre	4 X 11.90 @ 100
L12TM400	6 Metre	5 X 11.90 @ 100
L12TM500	6 Metre	6 X 11.90 @ 100
L12TM600	6 Metre	7 X 11.90 @ 100

And Alls of using is accordance to AS NZS 2870-2011.

The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments.

The is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different.

The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft:

(a). pier to be located on the intersection of every third internal beam.

(b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.

Other supplier products

	Special concrete reinforcing mesh	Heyou special concrete reinforcing meshes are produced by SD grade B500C(ELOT 1421-3) of steel bars ensures accuracy in geometry and enables eas...
	Steel wire mesh for tunnel support	Tunnel reinforcing mesh name reinforcement mesh, reinforced mesh, welded fabric, welded steel wire mesh. consist of longitudinal and transverse b...
	SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh	Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250...
	PPAF R / PPAF C / PPAF V BRC Mesh / reinforcement meshes	Heyou wire mesh factory can supply reinforcement meshes accordance to Normes Francaises NF A 35 016-1996. The material of reinforcement meshes o...
	K188 / K335 reinforcement wire mesh	Anping Heyou Wire Mesh Products Co.Ltd can supply reinforcement wire mesh conformance with Swiss Standard SIA 16211 S550. Its has widely useage ...

供应产品

Same products

	Micro Perforated Metal	卖方: Hebei Baima Wire Mesh Manufacturing Co., Ltd	Micro Perforated Metal Micro Perforated Metal Sheet , widely Used in Filter Production, wit...
	Micro Perforated Stainless Steel Sheet	卖方: Hebei Baima Wire Mesh Manufacturing Co., Ltd	Micro Perforated Stainless Steel Sheet Micro Perforated Stainless Steel Sheet Supplier | Pre...
	Micro Perforated Aluminum Sheet	卖方: Hebei Baima Wire Mesh Manufacturing Co., Ltd	Micro Perforated Aluminum Sheet | Custom Precision-Perforated Aluminum Panels High-Precis...
	Custom Perforated Metal	卖方: Hebei Baima Wire Mesh Manufacturing Co., Ltd	Custom Perforated Metal Perforated Sheet is a product of using mechanical stamping to for...
	Perforated Plate Composite Sintered Mesh	卖方: Hebei Da Shang Wire Mesh Products Co.,Ltd.	Perforated Plate Composite Sintered Mesh Perforated plate composite sintered meshhas become a ve...