Aluminium Forging
Aluminium Forging
Forging is a manufacturing process where metal is pressed, pounded or squeezed under great pressure to produce high-strength parts. Forged aluminum is ideal for applications where performance and safety are critical but a lighter-weight metal is needed for speed or energy efficiency. There are primarily three types of forging processes: open-die forging, ideal for larger aluminum components; closed-die forging, well-suited for more intricate designs and tighter tolerances; and ring-rolled forging used to create high-strength ring-shaped applications.
Specification of aluminum forging china
|
Model Grade |
5052/6061/7075/2024/ |
|
Temper |
T6/T651/T6511/T7451/O/H112 |
|
Diameter |
10mm-150mm;150mm-200mm;200mm-420mm |
|
Length |
As request;2000mm-3000mm;3000mm-6000mm |
|
Hardness |
More than 120 |
|
Alloy or Not |
Alloy |
|
Surface treatment |
Mill finished or bright |
|
MOQ |
2MT-3MT; |
|
Technology standard |
GB/T 3880/ASTM.B209/EN485 |
|
Grade Model |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Al |
|
5052 |
- |
- |
Remainder |
|||||||
|
6061 |
- |
Remainder |
||||||||
|
7075 |
- |
Remainder |
||||||||
|
2024 |
- |
Remainder |
Buy from aluminum forging companies.
Application of Aluminium Forging
The forging process is used in applications where performance and strength are critical requirements.
Forged components are commonly found at points of stress and shock. Pistons, gears and wheel spindles in high performance automobiles and aircraft are often made from forged aluminum.
When forged and heat treated, aluminum forgings exhibit some mechanical properties comparable with steel forgings. The strength to weight ratio is therefore far superior. For example, the 2014-T6 aluminum forging has a typical UTS of 485MPa, exceeding that of many grades of steel forgings, and all commonly used aluminum castings.
Or you can buy anodized aluminium plate.
Send product request
Other supplier products
 |
2024 Aluminium Sheet | A typical hard aluminum alloy in the aluminum-copper-magnesium series, its composition is relatively reasonable, the overall performance is better,... |
 |
1100 Aluminium Disc | Aluminium circlechina is also known as aluminium disc circle, which is a perfect material for making aluminium round metal. Usually, it is cut from... |
 |
3104 Aluminium Coil | 3104 aluminum coil (AL-Mn) belongs to modification aluminum alloy, and has good deep-drawing property, which is suitable for thinning the tensile l... |
 |
6061 Aluminium Round Bar | 6061 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is availble in various alloys of... |
 |
5754 Aluminium Checkered Plate | 5754 Aluminium Checkered Plate Aluminium checker plate or 'aluminium chequer plate', an aluminum anti slip plateis a type of metal tread plate tha... |
