Aluminium Forging
Aluminium Forging
Forging is a manufacturing process where metal is pressed, pounded or squeezed under great pressure to produce high-strength parts. Forged aluminum is ideal for applications where performance and safety are critical but a lighter-weight metal is needed for speed or energy efficiency. There are primarily three types of forging processes: open-die forging, ideal for larger aluminum components; closed-die forging, well-suited for more intricate designs and tighter tolerances; and ring-rolled forging used to create high-strength ring-shaped applications.
Specification of aluminum forging china
Model Grade |
5052/6061/7075/2024/ |
Temper |
T6/T651/T6511/T7451/O/H112 |
Diameter |
10mm-150mm;150mm-200mm;200mm-420mm |
Length |
As request;2000mm-3000mm;3000mm-6000mm |
Hardness |
More than 120 |
Alloy or Not |
Alloy |
Surface treatment |
Mill finished or bright |
MOQ |
2MT-3MT; |
Technology standard |
GB/T 3880/ASTM.B209/EN485 |
Grade Model |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Al |
5052 |
- |
- |
Remainder |
|||||||
6061 |
- |
Remainder |
||||||||
7075 |
- |
Remainder |
||||||||
2024 |
- |
Remainder |
Buy from aluminum forging companies.
Application of Aluminium Forging
The forging process is used in applications where performance and strength are critical requirements.
Forged components are commonly found at points of stress and shock. Pistons, gears and wheel spindles in high performance automobiles and aircraft are often made from forged aluminum.
When forged and heat treated, aluminum forgings exhibit some mechanical properties comparable with steel forgings. The strength to weight ratio is therefore far superior. For example, the 2014-T6 aluminum forging has a typical UTS of 485MPa, exceeding that of many grades of steel forgings, and all commonly used aluminum castings.
Or you can buy anodized aluminium plate.
在线联系供应商
Other supplier products
Aluminium Forging | Forging is a manufacturing process where metal is pressed, pounded or squeezed under great pressure to produce high-strength parts. Forged aluminum... | |
Aluminium Checkered Plate | China Alum Checker Plate This alloy aluminum in the main alloy elements as magnesium and silicon, with middle strength, good corrosion resistance,... | |
Aluminium Round Bar | aluminium alloy round bar(Rod) is availble in various alloys offering a range of weldability, corrosion resistance and machinability. High strength... | |
Aluminium Sheet | Aluminium Sheet Sheet, thickness range from 1mm to 6mm ;the most widely used form of aluminum, is found in all of the aluminum industry’s ma... | |
5083 Aluminum Sheet | China5083 AluminumSheet The 5083 sheetbelongs to the Al-Mg series alloy and has a wide range of applications, especially the construction industry... |
Same products
干式变压器绕组用铝带 热轧1050/1060/1050A铝带制造商 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 干式变压器绕组用铝带主要由铝锭熔炼后经压轧分切而成,采用优质纯铝为原料,常见的牌号有1060、1050、1050A、1070、1070A、1350等,状态通常为O态(表示软态)。 干式变压... | |
冷轧铝卷 0.15-4.0mm 1060 1100 3003 3105 5052 铝合金卷 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 冷轧铝卷通常指由铸轧料通过过冷轧工艺进行加工处理的,通常被叫做铸轧铝卷加工的冷轧铝卷。冷轧是一种常见的金属加工工艺,它是在金属经过加热(通常是热轧)后,通过在室温或稍微低于室温的条件下进行进一步... | |
批发5052 3003 6061踏步/指针/菱形/扁豆/橘皮 花纹铝板用于车厢/楼梯防滑 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 花纹铝板是铝板通过外力机械加工制作成的,是在铝平板的基础上用辊压机碾压,铝平板表面形成凸出的花纹,花纹铝板常见花纹有一条筋、两条筋、三条筋、五条筋、扁豆、指针、橘皮压花铝板等。 花纹铝板板... | |
定制6082-T6挤压铝型材,用于船舶/汽车 | 卖方: Henan Hongchang Aluminum Co., Ltd. | Hongchang铝业常备价格优势的CCS、DNV、ABS、LR等船级社认证的船用铝板和汽车用各系铝板、铝卷、铝型材、带筋板、钢铝接头、铝焊丝等现货。公司现有模具500多套,库存型材300多种规... | |
2UUL Tinning Needle Gold Plated FPC Connector Reballing Solder Bar | 卖方: Phonefix | 2UUL SC98 Gold Plated FPC Connector Reballing Solder Bar 3 Bars with Ultralight Carbon Fiber Hold... |