COLD HEADING DIE CORE NUT DIE

• 
• 
• 

The cold headingdie bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required to have high strength, toughness and wear resistance, tungsten carbide with high cobalt content(Most grades applied to the heading die core contains cobalt more than 12%, some even reach up to 25%) can perfectly meet this requirement, so all better heading die with long service time use tungsten carbide as die core material, and the outer case of the die is made of hot working die steel (the hardness after heat treatment is about HRC 45). The core is inserted the outer case by cold pressing or hot pressing method, so as to make the core and case combine tightly, and the outer case causes certain compressive stress to the inner core, which improves the service conditions of the die and extends the service time of the die.

Cold heading die(also mentioned as cold header dies) for fastener industry can be divided into cutting die, forming die, and trimming die as per the different production process of a fastener product, and forming die includes the first station, second station, third station, up to the fifth station for some complicated items. Divided by detailed fastener products, there are bolt die, screw die, nut die, hexagon nuts with flange die, drill point die etc. The carbide grade for flanged hexagon nuts is special, please check with Betalent carbide sales person.

In addition to cold upsetting, there is also a warm heading or hot heading process used in fastener manufacturing, especially for large size or complicated deformation fastener blanks, when cold heading may cause heading defects. Betalent has a series of carbide grades for warm heading, hot heading and hot forging, below is the list:

For more grades please contact sales person.

Tips for heading die carbide grade selection:

3. If you want to improve your heading die further or want to change to a better supplier, it is very important to describe the current problem of the current die to Betalent salesperson, and if possible take show the picture of the broken point detail of the die, sometimes a problem may be caused by too hard grade, sometimes too soft, sometimes special formula grades may be needed, you can turn to Betalent carbide’s professional engineer team for a solution.

As one of the most professional carbide tool manufacturers, Xiamen Betalent Carbide Co., Ltd provides carbide product, heading forging, cold headed parts, carbide cutting tools, tungsten carbide rods for sale, etc. Contact us to know more.

Other supplier products

	CARBIDE ROD	Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91....
	WATER METER SHAFT	The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called...
	CARBIDE ROD	Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91....
	PLOTTER BLADE	Vinyl cutter blade or named Vinyl plotter blade is installed to vinyl cutter machine Cutting materials: instant stickers, car stickers, back adhe...
	SOLID CARBIDE ROD	Solid carbide rodis the most general shape of tungsten carbide blank material for cutting tools. And for cutting tools application, tungsten carbi...

Same products

	4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL	Seller: Xiamen Talent Carbide Co.,Ltd	4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL ...
	3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM	Seller: Xiamen Talent Carbide Co.,Ltd	3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cut...
	2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	Seller: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDEMILLINGCUTTERS Grain size ...
	2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER	Seller: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18...
	2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	Seller: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutti...