Magnetic Steel Triangle Chamfer
Magnetic steel triangle chamfer is magnetic shuttering solutions for precast concrete industry!
In fact, construction market is too small compared to all Neodymium magnet markets, and Neodymium magnet is also too small to extensive construction accessories. Almost none of magnet suppliers have interest or knowledge in the application of magnet in the construction market. We focus our assembly attention on developing and manufacturing Neodymium magnet assemblies for the construction industry, especially precast concrete industry.
Our is designed to create beveled edges on corners and faces of concrete wall panels and small concrete items. Magnetic chamfer is made of high quality steel with embedded strong magnets. The strong magnets integrated at the surface of the chamfer ensure fast and accurate placement of the chamfer in steel formwork construction without slipping or sliding. The magnetic chamfer can be delivered in several different sizes with magnets on single side, double sides or the hypotenuse along the full 100% length or just along 50% of the length. Thanks to use in many customers, some of our magnetic chamfers have been recognized as the standard design or size in the precast concrete industry.
Characteristics:
Reusable and durable
Easy to operate
Quick to position, remove and clean
No screws, bolts or welding necessary to accurately position chamfers on formworks therefore preserving surface finish to increase the lifetime
Excellent quality result on the concrete panels due to much of the building finish problems eliminated
Advantages:
Unbeatable know-how in Neodymium magnet, the most important component to ensure quality of magnetic chamfers
More sizes available to save tooling cost
Standard sizes in stock and available for immediately delivery
Custom-made solutions available upon request
Technical Data:
|
Part Number |
A(mm) |
B(mm) |
C(mm) |
Length(mm) |
Length of Magnet |
Type of Magnetized Side |
Maximum Operating Temperature(°C) |
|
HM-ST-10A |
10 |
10 |
14 |
3000 |
50% or 100% |
Single |
80 |
|
HM-ST-10B |
10 |
10 |
14 |
3000 |
50% or 100% |
Double |
80 |
|
HM-ST-15A |
15 |
15 |
21 |
3000 |
50% or 100% |
Single |
80 |
|
HM-ST-15B |
15 |
15 |
21 |
3000 |
50% or 100% |
Double |
80 |
|
HM-ST-20A |
20 |
20 |
28 |
3000 |
50% or 100% |
Single |
80 |
|
HM-ST-20B |
20 |
20 |
28 |
3000 |
50% or 100% |
Double |
80 |
|
HM-ST-25A |
25 |
25 |
35 |
3000 |
50% or 100% |
Single |
80 |
|
HM-ST-25B |
25 |
25 |
35 |
3000 |
50% or 100% |
Double |
80 |
Send product request
Other supplier products
 |
Reusable Bushing Magnet | Bushing magnet is magnetic shuttering solutions for precast concrete industry! In fact, construction market is too small compared to all Neodymi... |
 |
900Kg Shuttering Magnet | 900Kg shuttering magnet is magnetic shuttering solutions for precast concrete formworks! In fact, construction market is too small compare... |
 |
Segment Motor Magnet | Segment or arc shaped Neodymium magnets are widely used instead of expensive radial rings in electric motors. Horizon have been focusing o... |
 |
disc Neodymium magnets | Horizon supply Neodymium magnets in round shaped. Usually we call them cylinder Neodymium magnets, disc Neodymium magnets or rod Neodymium magn... |
 |
Countersunk Hole Pot Magnet of NdFeB | Horizon have been producing and supplying the pot magnet. The pot magnet is also called cup magnet, holding magnet, round base magnet, moun... |
Same products
 |
Solid Impeder Cores Ferrite Rods soft magnetic material for Tube Welding of High Frequency Induction Increasing The Efficiency of Welding Process | Seller: 837294 | CRS solid fluted type:Features:It is characterized by a radial groove type, which can effectively... |
|
|
Hollow Impeder Cores Ferrite Rods soft magnetic material for Tube Welding of High Frequency Induction increasing the efficiency of welding process | Seller: 837294 | Ferrite Impeder Rods for tube welding: High Frequency Induction welding is the common process fo... |
 |
Rare Earth Permanent Round NdFeB Countersunk Magnet | Seller: Dongyang Ma Li Magnet Co., Ltd. | Rare Earth Permanent Round NdFeB Countersunk Magnet are made of NdFeB Ceramic Powder, which is th... |
 |
Pot Magnets With Countersunk(Screw) Hole | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | A compact magnet system consisting of a steel shell with high permeability and a countersunk magn... |
 |
Channel Magnets-Rectangular Mounting Pot Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | The magnet assembly composed of a U-shaped ferromagnetic iron shell and a rectangular magnet is c... |
